8p+6p+4pratchet Type Crimping Tool

Model NO.: GL-5029B
Cutter: Short Knife
Stripper: for Round and Flat Cables
Color: Orange or Two Color
Handle: Ratchet Mechanism
Trademark: OEM
Transport Package: Blister Card
Specification: CE
Origin: China
HS Code: 8205590000
Model NO.: GL-5029B
Cutter: Short Knife
Stripper: for Round and Flat Cables
Color: Orange or Two Color
Handle: Ratchet Mechanism
Trademark: OEM
Transport Package: Blister Card
Specification: CE
Origin: China
HS Code: 8205590000
8p+6p+4pratchet Type Crimping Tool
8p+6p+4pratchet Type Crimping Tool8p+6p+4pratchet Type Crimping Tool8p+6p+4pratchet Type Crimping Tool
Crimping tool 8p+6p+4p

Instructions:

RatchetType: Squeeze handles until it stops to open the handles.

1. Insert cable between stripper blades.
1a. Insert 4P/6P cable from the top end of the stripper until it touches the stop guide (stripping length 6mm).
1b. Insert 8P cable between stripper blades and let it extend a little past the lower cut blade.

2. Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.

3. Strip Round Cable
Insert the cable into the round stripping hole, turn the crimper in counter clockwise direction and cable in clockwise at the same time.

4. Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end.

5. Place modular plug with cable into the tool's holder. Make sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.

6. Remove the crimped plug from the tool.

7. During the crimping process, you may turn the screw on the ratchet in counterclockwise direction to stop the incorrect operation.

8. To crimp "DEC" plug, follow step 1 to step 3.
Remove the screw on the left side of the 6P holder, insert the "DEC" plug and cable into the 6P holder and squeeze handles till it stops.
Place of origin Zhejiang
Package Blister card
Color orange or two color
Application 8p+6p+4p
8p+6p+4pratchet Type Crimping Tool
8p+6p+4pratchet Type Crimping Tool8p+6p+4pratchet Type Crimping Tool8p+6p+4pratchet Type Crimping Tool
Crimping tool 8p+6p+4p

Instructions:

RatchetType: Squeeze handles until it stops to open the handles.

1. Insert cable between stripper blades.
1a. Insert 4P/6P cable from the top end of the stripper until it touches the stop guide (stripping length 6mm).
1b. Insert 8P cable between stripper blades and let it extend a little past the lower cut blade.

2. Squeeze handles until it stops, cable must be kept perpendicular and then pull from the tool.

3. Strip Round Cable
Insert the cable into the round stripping hole, turn the crimper in counter clockwise direction and cable in clockwise at the same time.

4. Remove the outer jacket, insert the stripped cable into the plug and be sure the left wire at one end matches the right wire at the other end.

5. Place modular plug with cable into the tool's holder. Make sure the stripped wire is between the tab and gold contacts. Squeeze handles until it stops.

6. Remove the crimped plug from the tool.

7. During the crimping process, you may turn the screw on the ratchet in counterclockwise direction to stop the incorrect operation.

8. To crimp "DEC" plug, follow step 1 to step 3.
Remove the screw on the left side of the 6P holder, insert the "DEC" plug and cable into the 6P holder and squeeze handles till it stops.
Place of origin Zhejiang
Package Blister card
Color orange or two color
Application 8p+6p+4p

10mm Led Strip Connector is connected between the light bar, light bar is constantly presenting various lengths an accessory. Usually, by the light of the width divided into several types of connection fittings.

10mm Strip Connector 10mm Strip Connector

10mm Strip Connector can be divided into waterproof and not waterproof, single and porous. 10mm means the width is 10mm, and this connector is for RGB color led strip. The other materials are the same as 8mm LED Strip Connector.

We focus on LED area, is a high-tech lighting enterprise deal in develop, produce and sales so as 10Mm Strip Connector.


Owns DIP LED,SMD LED professional production lines and LED lighting products lines, the produce volume per month for DIP LED,SMD LED is 50 million pieces, for LED flexible strip light and 10mm Strip Connector is 500 thousands meters, for LED flexible strip light for car is about 200 thousands pairs, for LED tube light is 50 thousands pieces, for LED Spotlights are 200 thousands pieces, for LED ceiling light are 50 thousands pieces.

10mm Strip Connector files:

10mm Strip Connector


Mingxue Optoelectronics Co.,Ltd. has apply the I S O 9 0 0 1: 2 0 0 8 international quality management system certificate, we apply the CE, RoHS and SAA certificate for our led lighting product.

Our R & D team can handle highly customized designs and offer OEM and ODM services.
We hope to set up a long-term partnership with you through our high quality products and our Sincere Service!

10mm Strip Connector

10mm Strip Connector

10mm Strip Connector

10Mm Strip Connector,White 10Mm Strip Connector,Rgb 10Mm Strip Connector,2Pin 10Mm Strip Connector

Shenzhen Mingxue Optoelectronics CO.,Ltd , http://www.mingxueled.com