In 2016, DJI was a frequent action. Marvic's "Que" recently released has already surprised everyone. And just a few days ago, DJI Innovations again launched the final two finale titles in 2016 in the United States. This made a big splash and earned everyone's attention. On November 21st in Beijing, DJI Innovation held a press conference to bring Inspire2 and Phantom4Pro into the domestic market. The first appearance was Dajiang Phantom4Pro, and Mr. Qiao Yan, CEO of Dajiang Media explained the main performance of Phantom4Pro. The UAV is equipped with a 1-inch 20-megapixel image sensor that captures 4K/60fps video and captures still photos at 14 frames per second. A mechanical shutter is also used to prevent smearing. Not only that, but H.2644K/60fps video or H.265/HEVC4K/30fps video can be captured at 100Mbps. In terms of imaging, there has been a significant improvement over Phantom4. The “one-inch-long, one-inch-inch†larger photosensitive element also enables the next generation of products to have excellent video shooting capabilities, restore high dynamic and detailed images, and provide more space for post-processing. Before this, there were players worried about Marvic's impact on Phantom4. It seems that the engineers of Dajiang helped us to consider it. The appearance of Phantom4Pro has pulled the performance space of the Phantom series again by a higher level, further subdividing and balancing this price range. Drone market. The Flight Autonomy system adds rear-view vision sensors and infrared sensors on both sides of the fuselage, allowing Phantom4Pro to have five-way environment recognition and four-way obstacle avoidance capabilities, with higher security and smarter flight. The front, rear and bottom of the camera are equipped with binocular vision sensors. The front and rear environment detection distance can reach 30 meters. The binocular vision in any direction can achieve positioning hover. The use of titanium alloys and magnesium alloys makes the body light and strong. Phantom4Pro is equipped with a one-piece remote control, integrated 5.5 inch 1080p high-brightness display, the maximum brightness of up to 1000cd/m2, still clearly visible in direct sunlight. The integration and stability are higher, which is a very practical design for aerial photographers.