| PAR56 LED REPLACEMENT BULB FOR SWIMMING POOL AND FOUNTAIN LIGHTS - 32W |
---|---|
Part # | Â HX-P56-SMD3014-252/ HX-P56-SMD3014-333/ HX-P56-SMD3014-441 |
Light Bulb Dimensions | 7" Diameter 3" Deep |
Input Voltage | 12VDC or 12VAC |
Dimmable | No |
Power Consumption | 18 Watts/24Watts/35Watts |
Direct Equivalency | 300 Watt PAR56 Lamp |
Light Bulb Base Type | Festoon Screw Terminal |
LED Type | Ultra Bright SMD LEDs |
Beam Angle | 120 Degrees |
Weight | 1KG |
Average Lifespan | 50,000 hours |
Warranty | 1 Year |
IP Rating | IP68 |
Operating Temperature | -10 degrees Fahrenheit (-20 Celsius) to +122 degrees Fahrenheit (+50 Celsius) |
Suitable Uses | Underwater Use Only, bulb must be in direct contact with water for proper cooling. |
Standards /Â Certifications | ROHS CE |
Packing | 12PCS/CTNS |
Carton Size | 37*38*55CM |
Three control modes make the operation more easier and enjoyable …
Â
Model One: Colors change automatically.Â
Turn on the light, it will run at model one in the following order of colors:RGB → RG↓B↓ → R→ RG↑ → RG → R↓G → G → GB↑→ GB → G↓B → B → R↑B →RB → RG↑B → next circle
Â
1Press the key "1" to control 7 static modes:R,G,B,RG,GB,RB, RGB
2Press the key "2" to control 5 dynamic modes: clockwise switching mode of RGB, anticlockwise switching mode of RGB, full color swit -ching mode of RGB, gradual switching mode one of RGB, gradual switching mode two of RGB(R="red",G="green",B="blue")
3Press the key "3" to control the speed of color changing under the mode of key "B".There are 10 levels of speed.
4Press the key "4" to control on/off state of light
Moder two:Colors controlled by the remote controller
1Press the key "1" to control 7 static modes:R,G,B,RG,GB,RB, RGB
2Press the key "2" to control 5 dynamic modes: clockwise switching mode of RGB, anticlockwise     switching mode of RGB, full color swit -ching mode of RGB, gradual switching mode one of RGB,   gradual switching mode two of RGB(R="red",G="green",B="blue"
4Press the key "3" to control the speed of color changing under the mode of key "B".There are 10 levels of speed.
5Press the key "4" to control on/off state of light
Â
Model three: Colors controlled by turning on/off.
This mode is design for the situation that the lights are controlled without remote controller.Turn on the light, it will be at mode one. Turn it off and then turn it on again in 1~3s, the light will be run in the following order of colors: R,G,B,RG,GB,RB,RGB,clockwise switching mode of RGB(speed 4), anticlockwise switching mode of RGB(speed 4), full color switching mode of RGB (speed 4), gradual switching mode one of RGB(speed 4), gradual switching mode two of RGB(speed 4).
ÂÂ
Smd Components Conuter Application:
1, All the SMD material belt type parts
2, Expects the band pulley diameter: All size is suitable
3, Expects the belt gap: 2, 4, 8, 10, 12, 16, 24, 32, 44, 56mm, cycle setting
4, Expects the belt width(POTCH): 8, 12, 16, 24, 32, 44, 56mm
SMD Components Conuter Features
1. Counting automatic the quantity of parts. Easy for counting and providing
materials.
2. Reel derailment protection device is provided against for tapes fall off.
3. A backup battery is fitted and available for counting even power is off or no
electricity.
4. A drawing type LCD screen is fitted.
5. A bar code device supplied as optional and easy for operation control.
SMD Components Conuter
Smd Components Conuter,Digital Smd Components Counter,Leak Hunting Smd Components Counter,Smd Components Counter With Omission Detection
Guangdong Juguangheng Automation Equipment Co.,Ltd. , http://www.smtsupplier.net