1. When the vehicle is driving on a bumpy road and passing through the speed limit belt, try not to change the disc. When the vehicle is strongly bumped, the disc is easily misplaced;
2. Using a deformed disc, a shaped disc, a thin or too thick disc, a punching disc, and a labeling paper on the disc may cause the chuck to malfunction;
3. Do not use discs with severe scratches. When playing, you will hear the sound of breaking and knocking the disc. This can cause premature aging and damage of the laser head.
4. Be sure to follow the instructions carefully. Forcibly inserting the disc will cause a malfunction. If more than one person uses the same car, it is best to prompt it next to the CD player, whether it is a front six-disc or a single disc, so as to avoid inserting more discs. Damage to the machine;
5. There is a bracket for the water cup next to the sound of the POLO and the Bora car. Please do not put a cup without a cover (such as a cola). Avoid spilling water and spilling water onto the car stereo, causing malfunctions;
6. The structure of the multi-disc movement is complicated. If it fails, it must be repaired at the designated repair station. Do not disassemble it at will, so as to avoid the expansion of the fault range caused by human factors.
7. Do not leave fingerprints on the disc;
8. Do not expose the disc to heat or sunlight, so as to avoid deformation.
9. After exiting the disc, put the disc back in the box to prevent scratch damage and dust.
1. When the vehicle is driving on a bumpy road and passing through the speed limit belt, try not to change the disc. When the vehicle is strongly bumped, the disc is easily misplaced;
2. Using a deformed disc, a shaped disc, a thin or too thick disc, a punching disc, and a labeling paper on the disc may cause the chuck to malfunction;
3. Do not use discs with severe scratches. When playing, you will hear the sound of breaking and knocking the disc. This can cause premature aging and damage of the laser head.
4. Be sure to follow the instructions carefully. Forcibly inserting the disc will cause a malfunction. If more than one person uses the same car, it is best to prompt it next to the CD player, whether it is a front six-disc or a single disc, so as to avoid inserting more discs. Damage to the machine;
5. There is a bracket for the water cup next to the sound of the POLO and the Bora car. Please do not put a cup without a cover (such as a cola). Avoid spilling water and spilling water onto the car stereo, causing malfunctions;
6. The structure of the multi-disc movement is complicated. If it fails, it must be repaired at the designated repair station. Do not disassemble it at will, so as to avoid the expansion of the fault range caused by human factors.
7. Do not leave fingerprints on the disc;
8. Do not expose the disc to heat or sunlight, so as to avoid deformation.
9. After exiting the disc, put the disc back in the box to prevent scratch damage and dust.
1. When the vehicle is driving on a bumpy road and passing through the speed limit belt, try not to change the disc. When the vehicle is strongly bumped, the disc is easily misplaced;
2. Using a deformed disc, a shaped disc, a thin or too thick disc, a punching disc, and a labeling paper on the disc may cause the chuck to malfunction;
3. Do not use discs with severe scratches. When playing, you will hear the sound of breaking and knocking the disc. This can cause premature aging and damage of the laser head.
4. Be sure to follow the instructions carefully. Forcibly inserting the disc will cause a malfunction. If more than one person uses the same car, it is best to prompt it next to the CD player, whether it is a front six-disc or a single disc, so as to avoid inserting more discs. Damage to the machine;
5. There is a bracket for the water cup next to the sound of the POLO and the Bora car. Please do not put a cup without a cover (such as a cola). Avoid spilling water and spilling water onto the car stereo, causing malfunctions;
6. The structure of the multi-disc movement is complicated. If it fails, it must be repaired at the designated repair station. Do not disassemble it at will, so as to avoid the expansion of the fault range caused by human factors.
7. Do not leave fingerprints on the disc;
8. Do not expose the disc to heat or sunlight, so as to avoid deformation.
9. After exiting the disc, put the disc back in the box to prevent scratch damage and dust.
RAM/RFM electric heating capacitors
RAM/RFM Electric Heating Capacitors
Electric Heating Capacitor,Film Heating Capacitor,Electric Capacitor Bank,Induction Heating Capacitors
YANGZHOU POSITIONING TECH CO., LTD. , https://www.cnchipmicro.com