ZTE's new machine is equipped with 2K screen transmission. ZTE launches VR products this month.

Recently, ZTE’s flagship machine, AXON, has a new rumor. AXON 2 will be equipped with a 2K screen for a more dazzling visual experience. And ZTE's own VR products are also planned, and will be published as early as this month.

Zeng Xuezhong, executive vice president of ZTE, revealed in Weibo: "With the rise of VR/AR and other technologies, new devices are bound to become a trend. Recently, VR glasses on the fire have high requirements on the screen resolution of mobile phones, so 2K screens are still It is necessary, but a good VR experience will not only depend on the 2K screen, but also the 2K screen color gamut, contrast, response time, power consumption, etc."

In fact, more considerations for mobile phones equipped with 2K screen manufacturers are for VR layout. From Zeng’s words, we can easily see ZTE’s ambitions for the VR market. According to sources, ZTE is about to release its own VR products, the fastest this month, and this VR product is also equipped with 2K screen.

According to rumors, ZTE AXON 2 will be equipped with the Snapdragon 820 processor, supplemented by 4GB RAM + 64GB ROM storage combination. The previously rumored 5.5-inch 2K display has been further confirmed. The front camera has 8 million pixels, while the rear camera has 20 million pixels. In addition, ZTE AXON 2 also supports full Netcom and back fingerprint recognition.

For the 2K display, some sane consumers don't buy it, because in their view, on a mobile phone with a size of less than 6 inches, the 1080P resolution is not much different from the 2K resolution. They believe that it is difficult for the naked eye to distinguish the difference between 1080P and 2K, and the excessively high resolution imposes a heavy burden on the processor and battery life.

Lock Motor

Lock motor product introduction:

Intelligent lock motor, also known as electronic locks, the product effectively combines the advantages of traditional electronic locks and electromagnetic lock overcame the electric lock too much noise, electromagnetic lock power shortage and the development of new products, and spiritual compared with electric control lock and magnetic locks, lock its performance more perfect, more obvious advantages.


Functions: it is widely used in various intelligent locks, such as Shared bicycle lock, fingerprint lock, glass lock, safe lock, hotel lock, family lock, inductive smart lock, etc


Features:Lock motor is based on micro precision reducer development, small intelligent micro precision reducer can do 10 mm in diameter, is widely used in safe, locks, smart locks, sensor intelligent lock;

This kind of motor has the characteristics of low noise, low energy consumption, small volume, light quality, high precision, large torque and durability

Method of use: the best stable in horizontal plane, installed on the lock motor output shaft parts, cannot use a hammer to knock, knock prone to press into the dc lock motor drive, may cause damage to internal components, and cannot be used in the case of blocked.

Lock motor

Operating temperature range:

lock motor should be used at a temperature of -10~60℃.

The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.

If a lock motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.


Storage temperature range:

lock motor should be stored ta a temperature of -15~65℃.

In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.


Service life:

The longevity of lock motor is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.



●Use with a load that exceeds the rated torque

●Frequent starting

●Momentary reversals of turning direction

●Impact loads

●Long-term continuous operation

●Forced turning using the output shaft

●Use in which the permitted overhang load or the permitted thrust load is exceeded

●A pulse drive ,e.g.,a short break,counter electromotive force,PWM control

●Use of a voltage that is nonstandard as regards the rated voltage

●Use outside the prescribed temperature or relative-humidity range,or in a special environment.

●Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.


when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you

Looking forward to your inquiry. Welcome to our factory.

Lock motor


Lock Motor,Intelligent Lock Motor,Smart Lock Motor,3V Lock Motor

Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com