0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

Model NO.: LK6PPUA62L1
Height: 0.5u
Length: 19 Inch
Color: Black
Trademark: Standard or Lulink
Transport Package: Bubble Wrap and Box
Specification: 24 Ports
Origin: China
HS Code: 8517709000
Model NO.: LK6PPUA62L1
Height: 0.5u
Length: 19 Inch
Color: Black
Trademark: Standard or Lulink
Transport Package: Bubble Wrap and Box
Specification: 24 Ports
Origin: China
HS Code: 8517709000
0.5U 24 Ports Cat6 UTP Patch Panel with Back Bar
 
Product Description
 
ELECTRICAL:
1.  Voltage rating: 125 VAC RMS
2.  Current rating: 1.5 AMP
3.  Contact resistance: 20 Milliohms MAX
4.  Insulation resistance: 100 Megohms MIN @ 500 VDC
5.  Dielectric strength: 750 VAC RMS 60Hz, 1MIN
6. C6 PERMANENT LINK:CONFORM TO ANSI/TIA/EIA-568 B.2-1

MECHANICAL:
1.  Housing material: PBT+30%GF
2.  PANEL FLAME:ST-12, T=1.6, POWDER COATING IN BLACK COLOR
3. IDC material: PC, CONTACT:PHOSPHOR BRONZE, TIN PLATED
4.  RJ45 JACK LIFE: 750 TIMES MIN
7. IDC LIFE: 200 TIMES MIN
8. WIRE: AWG 22~24
9. TIA Cat 6 Perm. Link Test: Worst pair NEXT margin≥ 3.0dB
10. Retentiveness of insertion structure: 50N 60±5s

ENVIRONMENTAL:
1.  Storage: -40°TO +70°
2.  Operation: -10°TO 60°
    Mates with modular plug conforming to FCC part 68, Subpart F.

Product Drawing:
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

Why do we use Patch Panel?


A patch panel provides a convenient place to terminate all of the cable runs coming from different rooms into the wiring closet. Of course, one could skip the patch panel and just connect all RJ-45 connectors directly into the hub, but one may miss the following advantages:

You can label the patch panel so you know which room the cable run goes to. Putting the labels on the cables is tougher to read than labels on a patch panel and also there is risk of having the cable labels fall off. A patch panel is a step up from a punch-down block. It usually has a 110 style connectors on the back for the cable to run to the stations. Each of those connectors is wired to an RJ-45 on the front. The RJ-45 on the front provides a spot to plug in a patch cable that goes to the hub. The Type 110-style connectors are usually color-coded with 568A or 568B to match the color of the cable pairs.It is always essential that the style (568A or 568B ) on the patch panel matches the style of the wall plate.

In a few words patch panels gives you a very good cabling organization.


Application:
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar


Product  packaging

0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

There are so many types for you to choose from,any help you need,contact the sales person here,thanks!  
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

Company Information:

Lulink Technology, whose full name is Lulink Electronics Technology Co., Ltd, build on the year of 2001, initially as a leading network communication product supplier, engaged in connecting every corner of the world via the network in the most convenient manner and enriching people's life.

Now Lulink became one of Group company focus on the development, production, sales and service of Telecommunication products. The Factory base location on Hangzhou City, The office and Research central on Guang zhou ,Dong guan and Shen zhen,  which have hundreds staffs, and the capital asserts reach dozens of million RMB.

Luink's set up based on the market demands and strong requests of loyal customers to Lulink products. Now, our main products containF Five  parts: Networking cabling system, Fiber optic system ,Cable assembly,Smart Home system and solor system,thus a product diversification development pattern formed.

Lulink Will do more on the market research, Humanistic product design, professional service improvement, We expect to develop and make progress together with you while us continuously perfect and surpass ourselves. Let us work together to create a better and more brilliant future!

Lulink Service:

1)Reply your enquiry within 24 working hours;
2)Experienced staffs answer all your questions in fluent English;
3)Customized Design is available,OEM&ODM are welcomed;
4)Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs;
5)Special discount and protection of sales area will be provided to our distributor.

FAQ:

Q1: What kind of product do you offer?
A: Our main products include all cables: LAN cables, patch cable, faceplate, keystone, patch panel, cabinet, fiber optical cable, fiber optical adaptor, FO patch panel, ODF, and cable assembly as USB cables, HDMI cables, VGA cables, power cables, AV cables, computer cables and OEM cables.Also launch Smart Home system.
 
Q2: What's your MOQ? Can you offer free samples?
A: For network cable and fiber optic cable,normally,our MOQ is 3000m per item. 
Free samples can be sent to you if available in stock,freight cost need to be paid by your side.
 
Q3: What's your delivery time?
A: Normally, our lead time is 5~15 working days,subject to the order quantity.
 
Q4: What's your payment term?
A: We accept T/T,Paypal,Western Union,MoneyGram.Other payments accept through negotiation.
 
Q5:What's your shipping way?
A: We can support all different kinds of shipping way as following:
By Express,Like Fedex,DHL,UPS,TNT and ect.
By Air,need to know the destination airport.
By Sea,need to know the name of the port of destination.
Other delivery methods are available upon request from clients.

Welcome to contact me:

Name Dainty Choy
   
   
Tel. 86-20-87645225/87645158
Wh's app 0086-13416149195
Website www.lulink.cn
  www.lulink.en.alibaba.com
  http://lulink.en.made-in-china.com
0.5U 24 Ports Cat6 UTP Patch Panel with Back Bar
 
Product Description
 
ELECTRICAL:
1.  Voltage rating: 125 VAC RMS
2.  Current rating: 1.5 AMP
3.  Contact resistance: 20 Milliohms MAX
4.  Insulation resistance: 100 Megohms MIN @ 500 VDC
5.  Dielectric strength: 750 VAC RMS 60Hz, 1MIN
6. C6 PERMANENT LINK:CONFORM TO ANSI/TIA/EIA-568 B.2-1

MECHANICAL:
1.  Housing material: PBT+30%GF
2.  PANEL FLAME:ST-12, T=1.6, POWDER COATING IN BLACK COLOR
3. IDC material: PC, CONTACT:PHOSPHOR BRONZE, TIN PLATED
4.  RJ45 JACK LIFE: 750 TIMES MIN
7. IDC LIFE: 200 TIMES MIN
8. WIRE: AWG 22~24
9. TIA Cat 6 Perm. Link Test: Worst pair NEXT margin≥ 3.0dB
10. Retentiveness of insertion structure: 50N 60±5s

ENVIRONMENTAL:
1.  Storage: -40°TO +70°
2.  Operation: -10°TO 60°
    Mates with modular plug conforming to FCC part 68, Subpart F.

Product Drawing:
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

Why do we use Patch Panel?


A patch panel provides a convenient place to terminate all of the cable runs coming from different rooms into the wiring closet. Of course, one could skip the patch panel and just connect all RJ-45 connectors directly into the hub, but one may miss the following advantages:

You can label the patch panel so you know which room the cable run goes to. Putting the labels on the cables is tougher to read than labels on a patch panel and also there is risk of having the cable labels fall off. A patch panel is a step up from a punch-down block. It usually has a 110 style connectors on the back for the cable to run to the stations. Each of those connectors is wired to an RJ-45 on the front. The RJ-45 on the front provides a spot to plug in a patch cable that goes to the hub. The Type 110-style connectors are usually color-coded with 568A or 568B to match the color of the cable pairs.It is always essential that the style (568A or 568B ) on the patch panel matches the style of the wall plate.

In a few words patch panels gives you a very good cabling organization.


Application:
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar


Product  packaging

0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

There are so many types for you to choose from,any help you need,contact the sales person here,thanks!  
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar
0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

0.5u 24 Ports CAT6 UTP Patch Panel with Back Bar

Company Information:

Lulink Technology, whose full name is Lulink Electronics Technology Co., Ltd, build on the year of 2001, initially as a leading network communication product supplier, engaged in connecting every corner of the world via the network in the most convenient manner and enriching people's life.

Now Lulink became one of Group company focus on the development, production, sales and service of Telecommunication products. The Factory base location on Hangzhou City, The office and Research central on Guang zhou ,Dong guan and Shen zhen,  which have hundreds staffs, and the capital asserts reach dozens of million RMB.

Luink's set up based on the market demands and strong requests of loyal customers to Lulink products. Now, our main products containF Five  parts: Networking cabling system, Fiber optic system ,Cable assembly,Smart Home system and solor system,thus a product diversification development pattern formed.

Lulink Will do more on the market research, Humanistic product design, professional service improvement, We expect to develop and make progress together with you while us continuously perfect and surpass ourselves. Let us work together to create a better and more brilliant future!

Lulink Service:

1)Reply your enquiry within 24 working hours;
2)Experienced staffs answer all your questions in fluent English;
3)Customized Design is available,OEM&ODM are welcomed;
4)Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staffs;
5)Special discount and protection of sales area will be provided to our distributor.

FAQ:

Q1: What kind of product do you offer?
A: Our main products include all cables: LAN cables, patch cable, faceplate, keystone, patch panel, cabinet, fiber optical cable, fiber optical adaptor, FO patch panel, ODF, and cable assembly as USB cables, HDMI cables, VGA cables, power cables, AV cables, computer cables and OEM cables.Also launch Smart Home system.
 
Q2: What's your MOQ? Can you offer free samples?
A: For network cable and fiber optic cable,normally,our MOQ is 3000m per item. 
Free samples can be sent to you if available in stock,freight cost need to be paid by your side.
 
Q3: What's your delivery time?
A: Normally, our lead time is 5~15 working days,subject to the order quantity.
 
Q4: What's your payment term?
A: We accept T/T,Paypal,Western Union,MoneyGram.Other payments accept through negotiation.
 
Q5:What's your shipping way?
A: We can support all different kinds of shipping way as following:
By Express,Like Fedex,DHL,UPS,TNT and ect.
By Air,need to know the destination airport.
By Sea,need to know the name of the port of destination.
Other delivery methods are available upon request from clients.

Welcome to contact me:

Name Dainty Choy
   
   
Tel. 86-20-87645225/87645158
Wh's app 0086-13416149195
Website www.lulink.cn
  www.lulink.en.alibaba.com
  http://lulink.en.made-in-china.com

Stator And Rotor Lamination

Stator and rotor laminations are an important part of motors and generators. The stator and rotor laminations are made of electrical steel by cutting and stamping. Usually the laminations are circular, and for those large motors or generators, the laminations are fan-shaped. Usually the thickness of the stator and rotor laminations is 0.2mm, 0.35mm, 0.5mm, 0.65mm, but depending on the application, there are thinner or thicker laminations. We are able to produce motors of various sizes from 100mm to 1250mm outer diameter. For larger motors or generators, we can also produce stator segment laminations.

Customizable Stator laminations,Customizable Rotor laminations,Segmented Stator laminations,Premanent Magent Rotor Lamination

Henan Yongrong Power Co., Ltd , https://www.hnyongrongglobal.com