Pole |
height 3-15m or more/Q235 Q345 seamless steel/hot dip galvanizing and spraying  powder/ parameters vary according to models , the colour can choose freely as the colour card |
light sources | Operating Temperature -40°C~75°C , LED Chip BRIDGELUX / Cree ,≥60000H life span |
other accessories | nuts,screw,bolts fixed mount,wrie,embedded parts,flange |
working time | 8-12hours/day |
working temp & wind resistance | - 30°C-60°C & - ≥136km/H |
packages | nylon,woven bag,foam or plastic bubble.and we also can packed as your demands. |
Production Process
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Factory Show
Contact Us:Â
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob:Â 0086-15192600825
 Â
 Â
Material:
1. All of our material are purchased from famous mill factory to assure the quality.
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
1. Pole,base plate and under ground fixture can be specially made as required.
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
Inspection:
1. Management team :Â We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management .
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
If you are in need of our products, you may let us know and we will offer you good products with great quality and service.Pole |
height 3-15m or more/Q235 Q345 seamless steel/hot dip galvanizing and spraying  powder/ parameters vary according to models , the colour can choose freely as the colour card |
light sources | Operating Temperature -40°C~75°C , LED Chip BRIDGELUX / Cree ,≥60000H life span |
other accessories | nuts,screw,bolts fixed mount,wrie,embedded parts,flange |
working time | 8-12hours/day |
working temp & wind resistance | - 30°C-60°C & - ≥136km/H |
packages | nylon,woven bag,foam or plastic bubble.and we also can packed as your demands. |
Production Process
Raw material test → Cutting →Molding or bending →Welidng (longitudinal )→Dimension verify
→Flange welding →Hole drilling →Calibration → Deburr→Galvanization or powder coating ,painting →Recalibration →Thread →Packages
Factory Show
Contact Us:Â
Tel:Â 86-532-83978013
Fax:Â 86-532-83978023
Mob:Â 0086-15192600825
 Â
 Â
Material:
1. All of our material are purchased from famous mill factory to assure the quality.
2. AÂ mill certificate issued by the mill factory with stamp and signature must be provided before unload the material in our factory ,otherwise we have our reason to refuse the material .
3. Before put into production ,all the material must pass the chemical and physical analysis to make sure that they have meet the requested strength and component.
Design and Details
1. Pole,base plate and under ground fixture can be specially made as required.
2.The product has many types , which can meet different requirements of consumers,but the price and some technical specifications can vary greatly.
3. All the photographs are for reference only,and the actual products may vary from the photographs.
4. Lofting and design software :We have steel pole design software which can help us design all kinds of steel pole ,at the same time ,the TMA and LMA are adopted by us to provide the design the drawing accuratly.
Â
Inspection:
1. Management team :Â We have employed years of experience engineers to take charge of the overall managemnt ,especailly the technical managemnt and quality management .
2. Introducing ISO management ,We are awared TUV CE UL certificate .Â
3. QC Inpection:It is our company policy that all the finish product should be inspected by our specialzed QC in every manufacure steps and beofore the shipment.
Service:Â
7 Sample: We can send out sample for test in one week if the order quantity is big enough. But the shipment charges is usually paid by your side, the charges will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature. Welcome to contact us or visit our company.
If you are in need of our products, you may let us know and we will offer you good products with great quality and service.PU Leather Flip Cover Shockproof Case
PU Leather Flip Cover Shockproof Case,Pu Leather Case,Genuine Pu Leather Case,Best Premium Pu Leather Case
Guangzhou Jiaqi International Trade Co., Ltd , https://www.make-case.com