Delta's LED bulbs for Japanese companies began shipping
Delta Electronics confirmed that the company's LED bulbs for the Japanese electronics manufacturers will start shipping in the near future, and also set a record for Taiwanese manufacturers to OEM LED products. In addition, Delta also won the LED streetlight project in Daxing West Road, Taoyuan, and officially entered the engineering market.
Japan's electricity bill is about three times that of Taiwan, so the local “power†for promoting energy-saving products is quite strong. In terms of LED bulbs, there are many major manufacturers including Sharp, Panasonic and Toshiba to launch related products in the near future. The average LED bulb is about 4,000-5,000 yen per day, which is a high-priced product.
It is understood that a large electrical appliance factory in Japan will launch LED bulbs this month, flaunting the power consumption of only 1/10 of the traditional bulb, this product was commissioned by Delta Electronics. For Delta, it is possible to get this order from the Japanese companies in the LED Kingdom, which proves that the technology in the LED field has been highly recognized. In view of Japan's population of more than 100 million people, the LED bulb market is quite impressive, and the price of LED bulbs is much higher than that of power products. If the shipment of this product line can be amplified in the future, the contribution to Delta's revenue will be extremely high. considerable.
Not only that, Delta has also made new progress in the field of LED lighting. Recently, it won the LED streetlight project in Daxing West Road, Taoyuan. It is worth noting that Delta plans to switch the existing projector's light bulbs to LED lights in the future. In the future, consumers will be able to completely improve the projector's most problematic problem - the decline in light bulb performance.
The senior director of Delta Electronics said that it is "not the main PLAYER" in the LED field, but he stressed that "we will grow up."
1.ANTENK Tech ICS Series Ic Sockets are a low profile design available in single or dual row in .100" centerline pin spacing with .300" or .600" row spacing. Our ISD Series .are fine pitched sockets on 0.070" centerlines with .300" or .600" row spacing. All Adam Tech sockets are manufacured with our exclusive single beam dual wipe contact design which produces a high pressure wiping action for superior connectivity. In addition to an internal contact stop which prevents over stressing of the contact, each has a wide lead in to eliminate mis-mating and a closed bottom anti-solder wicking design.
2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so o
TECHNICAL SPECS:
Current Rating: 1.0Amp
Contact Resistance: 20MΩ max
Dielectric Strength: Min 1000 V RMS
Mechanical Life: Min 100 cycles
Insulation Resistance: 1000MΩ Min
Operating Temperature: -55°C to +125°C
Contact: Bronze,Tin plating
Contact Plating: Au or Sn Over Ni
Insulator Material: PPS+30%GF UL 94V-0
SPECIFICATIONS:
Insulator: PPS
Fiammability: UL 94V-0
Sleeve: Brass
Mating pin ∅: 0.41 mm
Mechanical life: min 500 cycles
Rated cument: 1A
Contact resistance: max 10 mΩ
Dielectric strength: min 1000V RMS
Ic Sockets,Ic Socket Connectors,Pin Ic Socket,Pin Ic Socket Connector
SHENZHEN ANTENK ELECTRONICS CO,LTD , http://www.antenk.com