The seven trade skills must be mastered during the inspection!

Speaking of the claim, many people may not want to, and the most frustrating is the customer's claim when the cargo captain does not know what? In other words, they haven't checked the goods at all, but they don't know exactly what the factory's products are. So it's very difficult to talk about the claims with the guests at this time. In order to reduce claims as much as possible, this first step must be done! So I've mentioned such a simple topic here, if you have time as a salesman or more concerned about your own goods, after all, they are the most clear of their own goods. Once the customer mentions the head, the goods that would have been lost may be lost because of your serious attitude! So this step is critical.

Preparation before inspection:

1, go to find a package that can put things, a little bigger, not too MINI, we are not going to work to show!

2, with the package, be sure to put things into the bag, so the boss saw you look good, the factory saw you look good. Work like a job.

Look for it on the desk. This pen should be put. What is the pen? Write inspection report, so the inspection report should bring it. What is the inspection inspection? Of course, it is a test product. Or how do you know what is produced? How to check the product? Some things can be measured visually, so just put your eyes on it. If you can't, if you need tools, you'll need to bring tools. To measure the length and thickness, bring a good ruler (measure tape, oil caliper, spiral micrometer, etc.). Weigh a weight with a scale or electronic scale. To measure the temperature with a thermometer. To measure humidity with a moisture meter and so on. The products are not the same, and the tools to be brought are different. However, the ruler must be taken, and the box gauge always needs to be measured. Otherwise, I can't be responsible for loading the container. Afterwards, of course, the tools can also be borrowed at the factory.

With almost the same tools, the contract can not forget, or when the factory to give you less stickers a few stickers, do not know how to print a few words! If you want to go out to be a car, the money should not be stopped by your wife, or else you can call the brothers to send you in the past.

Everything is ready, walk away, after a horn sound, to the factory! After the necessary greetings, you can also drink tea and enjoy the treatment of God.

Officially started:

1. Take out pens, inspection reports, inspection tools, and contracts from your beloved bags to see how many boxes there are. Then find a few workers to move the goods. You have to pick a few red spots from the million flowers. If it is not a professional inspection company, a typical ratio of 5% to 8% will suffice. If the number is too large, look at 15 boxes. The purpose of our own inspection is to understand the conditions of the factory's production products. When picking the best range of products, it is best to pick two boxes of goods to the east and two boxes of the west. Strengthen the randomness. Don't cheat at the factory. Do not know, then you can really miserable!

2. Pick a few boxes out of the East pick and pick the box number first. First check the box number, and then see if the carton is damaged. The carton is not a special foreign trade carton (special inspection number). Ah, the carton is unordered or Ordered (Europe likes to use no book, the United States generally has a subscription), There is no packing, packing is manual or automatic (Europeans like to use automatic, because the automatic packing machine is not booked The artificial ones are all about iron buckles. Finally, if you look at the sealing tapes, are there any requirements for customers (yellow tape, transparent tape, kraft paper tape, etc.) that are not required for I-shaped sealing?

After reading the cardboard box to see the girl's head, widen your eyes and be careful not to lose the ^o^ glasses. One word, one word, and one million words, one word, one word, one, 50DOLLAR, don't worry. One particular point to be emphasized here is that some factories do not know English, they do not fill in boxes like the box number, and the weight and size units have not been converted. The guests requested that the LBS made them KGS, and the INCH made CM. CUFT has written 18 for you and so on, these small details should pay attention to, the factory is not wilful to do wrong, but they do not know what to do right!

3, determine the carton no problem, open the carton to see the true beauty of the bride. Unexpectedly, there is still only an inner box, and the contract continues to be compared. To see if there is any need for printing on the inner box, ah, if you have a bar code, you will need to find a scanner to scan it. The factory did not bring it back. Inside the box If guests have requirements for sealing the tape, press the guests, if not required, it will be almost sealed. If it is not required, it will save the province, and the money will be hard to earn!

4, beauty came out. It is a pity to see the gift box. For the gift box, it is generally confirmed with the customer before production. You have to compare the color difference problem. If you modify the middle, you have to carefully print the text of the entire box. Ten thousand, I'm afraid that if it! Then look at the other requirements in the control contract, the most commonly used is the labeling, and there are UPC on the label to pay attention to scan. Pay attention to the color box guests request whether the three-sided seal or single-sided seal, if the guests did not request, to see the effect of single-sided seal, single-sided seal if the product is easy to come out, then it must be sealed on three sides!

5, said so much nonsense, into the subject - inspection! Look at the packaging of individual products, whether it is PB or PB/HEADER. The sealing of plastic bags is strict. The elevators are being booked. The customer has no requirements on the position of the staples. There is no requirement on the material of the PB. PB There is no printing on the bag, there is no error in the printed content, there is no need to ask for warning signs, there is no UPC code and the number of goods required, there is no requirement for MADEINCHINA, etc., must pay attention to the contract is consistent, all inconsistent with the guests To modify. Business Report [biz. Icxo. Com] look at the product after watching the package, take the confirmation sample for comparison, visually check the place with a visual inspection, use the tool's local tools, in principle, to be consistent with the confirmation sample! The most troublesome thing here is that there is something wrong with the quality of the product. If it is serious, then it must be unable to ship. If you are afraid, what you are afraid of is no more than enough goods. Judging by experience, we must decide the result of this shipment according to the nature of the guests and understanding of the guests! If you are not sure, take a few more shipments back to the company and give it to the leaders or experienced seniors to judge the delivery of the goods!

6. Repeat the above 3, 4, 5N times until you are satisfied.

7. Fill in the inspection report. The inspection report can also be filled with inspection results, write inspection results, sign your name, and then call the factory manager to sign the name. Ask them to pick up the mess, then pack your bag and don't forget about it!

Probably the steps are as follows, because different products may have different steps, and there are many links that are not necessarily required. Like the inner box, the box is not necessarily the same for every product. If everyone thinks it is necessary, Added, please follow up, thank you!

Three major treasure inspection ---- confirm the sample, the contract, as well as the most important experience, some common sense issues in the contract and samples may not appear, because too familiar, easy to forget, and common sense for newcomers They may not even know it at all, so newcomers should ask more questions, learn more, and listen more!