In led lamps, the quality of heat is directly related to the quality and life of the product. However, because of the hype of some merchants and the misinformation of so-called experts, there have been some misunderstandings.
1. Superstition thermal material
Because of the high-tech materials used, the heat can be dissipated. Its practical ordinary aluminum heat dissipation, after repeated tests, the temperature of the heat sink is only 3-5 degrees Celsius higher than the bottom of the radiator. That is to say, if a material with excellent thermal conductivity can be used, the temperature can be lowered by 3-5 degrees Celsius when the thermal resistance is zero.
2. Superstition heat pipe
The heat pipe has a good thermal conductivity, which is beyond doubt. But the heat that is derived from the heat sink eventually needs to go tropical through air convection. If there are no fins that dissipate heat, the heat pipe will soon reach thermal equilibrium and the temperature will rise with the heat sink. If you add heat sink fins to the heat pipe, you will eventually use fins to dissipate heat. Moreover, the contact points of the fins and the heat pipes are not as good as other methods. The result is a high cost and no improvement in heat dissipation. However, it is useful to use heat pipes on the integrated led, but the structure is reasonable!
3. Superstitious nano-radiation materials
Radiation heat dissipation is negligible in the current temperature of the lamp at around 50 degrees Celsius. The radiation coatings promoted by the manufacturers have a good radiation effect even if they are advertised, even if they reach the radiation capacity of black body radiation, the heat dissipation proportion is only a few percent. How is this meaning still to be considered! Moreover, the coating itself hinders the heat transfer, which affects the heat dissipation of the convection.
Industrial Gigabit Media Converter is 10/100/1000Base-TX to 1000Base-SX/LX Industrial Gigabit Fiber Converter. It will extend transmission distance of network up to 100Km via fiber port, and the UTP port can operation at 10M, 100M and 1000M application.
Industrial Gigabit Media Converter series complied with IEEE 802.3at High Power Over Ethernet technology (optional). It is downward compatible with 802.3af PoE standards to allow users flexibly deploy standard and high powered devices simultaneously with no need of software configuration. With Data and Power over Ethernet from one unit,Industrial gigabit Media Converter series shall reduce cables deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place.
Industrial gigabit media converter series is packaged in a special compact IP40 metal case that allows either DIN rail or panel mounting for easy installation at control cabinet. It accepts an integrated power supply with a wide range of voltages for worldwide operation. It can also be equipped with dual-redundant, reversible polarity 12V DC to 48V DC power supply inputs for high availability applications requiring dual or backup power inputs.
Industrial Gigabit Media Converter
Industrial Gigabit Media Converter,Industrial Media Converter,Industrial Fiber Media Converter,Industrial Fiber Converter,Hardend Gigabit Media Converter, Industrial 10/100/1000M Media Converter
Shenzhen N-net High-Tech Co.,Ltd , http://www.nnetswitch.com