The condenser of the air-cooled chiller is fin-type, and a heat-dissipating fan is installed at the top of the unit to directly dissipate heat through the fan to achieve heat exchange effect. Relatively speaking, it is much simpler to install than a water-cooled chiller, as long as the air-cooled chiller and the equipment being cooled are connected by pipes. The specific installer is as follows:
1. Before installation, you should choose a flat open space. It is best to re-build the cement foundation to ensure the level of the ground. After installing the air-cooled chiller, there is still room for future maintenance and guarantee. The ground can withstand the operating weight of the chiller.
2. The model of the chiller is different. The diameter of the inlet and outlet is different. When installing, choose the water pipe that matches the pipe diameter and connect it correctly.
3. Under any load, ensure that the water flow of the air-cooled chiller is normal and stable.
4. The design and installation of all chilled water pipes should be carried out in accordance with relevant standards. The pump should be located on the inlet pipe of the unit to ensure the positive pressure and flow of the unit.
5. The pipe should have a solid support independent of the chiller to prevent stress from being applied to the components of the air-cooled chiller. In order to reduce noise and vibration, it is best to install a vibration isolator on the pipe.
6. In order to operate the air-cooled chiller safely and stably, to ensure the normal use of various components, the poor water quality can be treated to avoid various impurities or corrosion deposits and the presence of pipes, evaporators and condensers. The heat effect increases the maintenance cost in the later period.
12 Degree Travelator,Passenger Elevator Motor,12 Degree Moving Walkways,Passenger Panoramic Elevator