Model NO.: LK-U5CB241
Wire Core Material: Bare Copper Wire
Certification: ISO
Trademark: Lulink / OEM
Transport Package: Standard Carry Box
Origin: China
HS Code: 8544421100
Model NO.: LK-U5CB241
Wire Core Material: Bare Copper Wire
Certification: ISO
Trademark: Lulink / OEM
Transport Package: Standard Carry Box
Origin: China
HS Code: 8544421100
CAT5E FTP LAN CABLE, Solid
PRODUCT DESCRIPTION
1. This kind of cable use bare copper to be the center conduction, with the
specification is 24AWG; PE is adopted to be the dielectric, Each pair of the
coppers is covered by polyester film and AL foil even outer. The earth wire is
installed between these two covers. The jacket is made of fireproof material, and
it's so significative to the Cat.5e communication.
2. This Cat.5e FTP cable is well conformed to the ISO/IEC, TIA/EIA and EN standards
and whose electrical characteristics are exceed the lastest ISO/IEC Cat.5e
standards.
3. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Static electric capacity: max:17.1nf/kf
3. Resisitance : max:28.6/kf
4. Unbalance resisitance: max 5%
5. Unbalance capacity: max 330pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 24AWG
2. Outer diameter: 6.1mm
3. Shielding material: AL foil
4. Earth wire: 24AWG bare copper  or CCA
5. Minimum bend radius: O.D.*6~8
6. Maximum pulling tension: 10kg
7. Jacket material:Â PVCÂ or LSZH
8. Roted temperature: -20~60ºC
9. Packing: Carton
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-Anylan;
3. Token ring;
4. ATM 155/ATM 622 etc;
STANDARD
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568-A-5
Â
Â
CAT6 FTP LAN CABLE, 4P, Solid
PRODUCT DESCRIPTION
1. The center conduction of the 4 pairs FTP Cat.6 cable is made of 23AWG bare
copper. This kind of cable also adopts PE material to be the dielectric, AL foil
to be the shield and fireproof material to be the jacket. Besides , the "+"
typer inner frame setted in the center is good for keeping the balance and
quality, which are so important for the cat.6 communication.
2. This Cat.6 FTP cable is conform to the related standards like ISO/IEC, TIA/EIA
and EN.
3. All the electrical characteristics are exceed the lastest Cat.6 standards
of ISO/IEC.
4. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Return resisitance: 14.9/100m
2. Impedance: 100±5
3. Static electric capacity: 46pF/m 1KHz
4. Unbalance capacity: 100pF/100m
5. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 23AWG
2. Outer diameter: 6.8mm
3. Shielding material: AL foil
4. Minimum bend radius: 60mm
5. Maximum pulling tension: 10kg
6. Jacket material: PVC/LSZH
7. Roted temperature: -20~60ºC
8. Packing: Carton or Axles
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-AnyLAN;
3. Token ring; ATM155/ATM622, etc.
STANDARD
1. ISO/IEC-11801 (2nd edition)
2. EN (2nd edition)
3. TIA/EIA-568B.2-1
Â
Â
FTP CAT6 outdoor lan cable ,4P, Solid
Specifications
1.0.56mm pure copper networking cable
2.Mainly used in computer connect
3.Jacket is PVC
Product Description:
Reference standard: ISO9001,CE ,ROHS
Bare solid copper conductor
RoHS complied PVC, PE or LSOH jacket
Complies to TIA/EIA-568B&ISO/IEC 11801
Application:
Ethernet, 10 Base-T, 100 Base-T4, ATM, TP-PMD Seppch, Telephone, Multimedia, Trunk Wiring
Cable Construction:
Conductor Dimension: 0.56mm
Core Dimension: 0.91mm 0.92mm
No. Of Pairs: 4 Â
Nom. OD: 5.3mm 14.0mm 13.0mm
Type of Jacket: PVC/PE PVC/PE PVC/PE
Electrical Characteristics:Â
Frequency(MHz): 1 4 10 20 31.25 62.5 100
Attenuation(dB/100m): 2.0 4.1 6.5 9.3 11.7 17.0 22.0
Impedance(ohm): 100 100 100 100 100 100 100
Return Loss(dB): 17 20 22 20 18 16 15
NEXT(dB/100m): 62.3 53.3 47.3 42.8 39.9 35.4 32.3
ELFEXT: (dB/100m): 61 49 41 35 31 25 21
PS NEXT(dB/100m): 62.3 53.3 47.3 42.8 39.9 35.4 32.3
PS ELFEXT: (dB/100m): 61 49 41 35 31 25 21
Packing:Â
1) Packing Lengths: 305m/roll
Other lengths available according to client's request.
2) Inner packing: Wooden reel, plastic reel, and paper reel available.
3) Outer packing: Carton box, pull out box, pallet available.
4) Other packing available according to client's request.
Â
Â
SFTP CAT5E lan cable,24AWG,4P,Solid Copper
SpecificationsÂ
Application Cable:TIA/IEA, ISO/IEO,568-A, 568-B
Solid Cable: SFTP,Cat5e.4p,Solid Copper
Insulation: Polyolefin,Medium Density Polyethylene
Drain Wire: Tinner Copper
Separator Tape: Synthetic Material
Shield: Aluminum-Mylar Tape
Â
Fabric |
Conductor O.D(mm) |
Insulation O.D(mm) |
Pairs |
Screem |
Completed Product O.D(mm) |
Sheath |
SFTP |
0.5/0.49 |
1.00 |
4 |
aluminium foil+copper wire braiding |
6.0 |
PVC/LSOH |
Product Performence
MHZ |
dB |
dB/100m |
NEXT dB |
PSNEXT dB |
ACR dB |
EKFEXT dB |
PSELFEXT dB |
0.722 |
19.4 |
1.8 |
74.1 |
64.0 |
65.0 |
66.0 |
63.0 |
1.0 |
20.0 |
2.0 |
67.7 |
62.3 |
63.0 |
63.0 |
60.8 |
4.0 |
23.0 |
4.1 |
60.2 |
53.34 |
52.0 |
51.7 |
48.7 |
8.0 |
24.5 |
5.8 |
59.2 |
48.8 |
46.0 |
45.7 |
42.7 |
10.0 |
25.0 |
6.5 |
57.9 |
47.3 |
44.0 |
43.8 |
40.8 |
16.0 |
25.0 |
8.2 |
55.5 |
44.3 |
39.0 |
39.7 |
36.7 |
20.0 |
25.0 |
9.3 |
53.5 |
42.8 |
37.0 |
37.7 |
34.7 |
25.0 |
24.3 |
10.4 |
51.8 |
41.3 |
34.0 |
35.8 |
32.8 |
31.25 |
23.6 |
11.7 |
46.7 |
39.9 |
31.0 |
33.9 |
30.9 |
62.5 |
21.5 |
17.0 |
44.7 |
35.4 |
21.0 |
27.8 |
24.8 |
100 |
21.0 |
22.0 |
38.1 |
32.3 |
13.0 |
23.8 |
20.8 |
Â
Â
SFTP CAT5EÂ outdoor lan cable,4P,Solid Copper
Specification:
Rated Temperature: -40°C ~ + 75°C
Wire Color Code:
Pair1:white/blue&blue Pair2:white/orange&orange
Pair3:white/green&green Pair4:white/brown&brown
Conductor: 26AWG or 24AWG Stranding ,Solid Bare copper
Insulation: HDPE
Drain Wire: 26AWG or 24AWG Stranding , Solid copper
Outer Shielded: AL-Mylar 100 %(min) coverage
Jacket: PVCÂ ,LSZH
Inner Jacket: HDPE
Impedance: 100±15% Ω at 1 ~100MHz
* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801
Cable assembly specification
Conductor |
Insulation |
Drain |
Shielded |
Outer Jacket |
Jacket |
AWG |
Specification mm |
Material |
Thickness (NOM.mm) |
Marerial |
Thickness (NOM.mm) |
OD (NOM.mm) |
Material |
Thickness (NOM.mm) |
 OD (NOM.mm) |
24 |
1/0.511 |
HD-PE |
0.18 |
1/0.511TC |
AL/Mylar |
PE |
0.60 |
5.5 |
PVC |
0.60 |
6.8 |
26 |
1/0.404 |
HD-PE |
0.18 |
1/0.404TC |
AL/Mylar |
PE |
0.60 |
5.3 |
PVC |
0.60 |
6.5 |
Â
Â
Â
CAT5E UTP LAN CABLE,Solid
PRODUCT DESCRIPTION
1. This kind of cable use bare copper to be the center conduction with the
specification is 24AWG and PE to be the dielectric. The jacket is made of
fireproof material, which is so meanful to the Cat.5e communication.
2. This Cat.5e UTP cable is conform to the SIO/IEC, TIA/EIA and EN standards and the
electrical characteristics are exceed the lastest Cat.5e standards.
3. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Static electric capacity: max:17.1nf/kf
3. Resisitance: max:28.6/kf
4. Unbalance resisitance: max 5%
5. Unbalance capacity: max 330pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 24AWG
2. Outer diameter: 5.0mm
3. Minimum bend radius: O.D.*4-6
4. Maximum pulling tension: 10.0
5. Jacket material: PVC/LSZH
6. Roted temperature: -20~60ºC
APPLICATION
1. 10/100/1000Mbps Ethernet
2. 100VG-AnyLAN
3. Token ring
4. ATM155/ATM622 etc
STANDARD
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568B
Â
CAT5E UTP LAN CABLE,4P, strander
Specification:
1.Copper diameter: 24AWG(7/0.2mm),26AWG(7/0.16mm),28AWG(7/0.12mm)
2. Outer diameter: 5.0mm
3. Minimum bend radius: O.D.*4-6
4. Maximum pulling tension: 10.0
5. Jacket material: PVC/LSZH
6. Roted temperature: -20~60ºC
7.Length :305m
8. Packing: Carton
APPLICATION:
1. 10/100/1000Mbps Ethernet
2. 100VG-AnyLAN
3. Token ring
4. ATM155/ATM622 etc
STANDARD:
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568B
Â
Â
CAT6 UTP LAN CABLE,23AWG,4P,Solid
PRODUCT DESCRIPTION
1. 4 pairs 100 Cat.6 cable, adopt 23AWG bare copper to be the center conduction, PE
to be the dielectric and fireproof material to be the jacket.
2. This cable is gray and conform to the standards like ISO/IEC, TIA/EIA and EN.
3. All the electrical characteristics are even exceed the lastest Cat.6 standards of
ISO/IEC. The "+" typer inner frame in the center ensures NEXT capacity and
reasonable minimum bend radius.
4. LSZH: means "Low somke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Return resisitance: 9.4/100m
3. Unbalance resisitance: ≤5%
4. Static electric capacity: 51pF/m 1KHz
5. Unbalance capacity: 73.2pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 23AWG
2. Impedance: 100±15
3. Outer diameter: 6.1±0.2mm
4. Minimum bend radius: 6-8×OD
5. Maximum pulling tension: ≤10
6. Jacket material: PVCÂ or LSZH
7. Roted temperature: -20~60ºC
8. Packing: Carton or Axles
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-AnyLAN;
3. Token ring;
4. ATM155/ATM622 etc;
STANDARD
1. ISO/IEC-11801 (2nd edition)
2. EN (2nd edition)
3. TIA/EIA-568B.2-1
Â
Â
1UTP cat5e 25pair cable.25*2*0.5mm bare solid copper conductor,HDPE insulation,PVC jacket.
2.24/26AWG outdoor cable
3.copper/CCA/CCS/CCAM
4.UTP/FTP/SFTP
5.CE/RoHs/ISO9001
UTP 25pairs cables Cat5e 24AWG
 |
4-pair  UTP |
4-pair  FTP |
4-pair  STP |
4-pair  SFTP |
Conductor  |
24/26 AWG Copper |
24/26 AWG Copper |
24/26 AWG Copper |
24/26 AWG Copper |
Shielded |
Unshielded |
Al Foil shielded |
 |
Al Foil shielded+Weave shielded |
Insulation |
PE |
PE |
PE |
PE |
Outer PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
Using environment: indoor
Conductor Diameter: 0.51mm (±0.02 )  24AWG
Insulated Conductor Diameter: 0.93 ± 0.02
Jacket thickness:0.65mm
Jacket Different dimension and outer sheath colours upon request
Minimum bend radius:4 outer cable diameter
Conductor elongation: 14%
Rip cord breaking strength: 92N
Pulling Strength: 92N
Installation temperature:-5~50 (-23 ~ +122)
Operating temperature: -20~75 (-4 ~ +167)
Reference stand: TIA/EIA 568B
  multi pair lan cable
1.HDPE insulated
2.LSZH jacket
3.CE/SGS Rosh
package:305meter/Roll Packaged in boxes outside
Â
Â
Drop wire telephone cable
1)figure 8 and figure B or Figure D, 1.02mm copper or CCS, PE or 2)PE or PVC jacket
drop wire telephone cable
1.Conductor: 1.02mm or 0.64mm CCS or Bare copper. conductor diameter can be produced as per customer request.
2. PVC or PE jacket.
3. 500meters or 1000meters per roll.Â
1.PHYSICAL DIMENSIONS |
 |
 |
Diameter of Conductor,mm |
1.02mm +/-0.01 |
Min. insulation Thickness.mm |
1.00mm |
OVERALL DIAMETER |
Major .MM |
6.85-7.50 |
Minor.MM |
3.85-4.5 |
H.PHYSICAL TESTS |
 |
 |
A.Conductor |
 |
 |
Elongation, % |
1.5 |
Tensile strength,kg/mm2 |
128 |
B.Insulation |
 |
Elongation, % |
7.5 |
Tensile strength,kg/mm2 |
0.0186 |
ELECTRICAL TESTS |
 |
Conductor Resistance,ohm/KM |
80.4 |
Â
CAT5E FTP LAN CABLE, Solid
PRODUCT DESCRIPTION
1. This kind of cable use bare copper to be the center conduction, with the
specification is 24AWG; PE is adopted to be the dielectric, Each pair of the
coppers is covered by polyester film and AL foil even outer. The earth wire is
installed between these two covers. The jacket is made of fireproof material, and
it's so significative to the Cat.5e communication.
2. This Cat.5e FTP cable is well conformed to the ISO/IEC, TIA/EIA and EN standards
and whose electrical characteristics are exceed the lastest ISO/IEC Cat.5e
standards.
3. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Static electric capacity: max:17.1nf/kf
3. Resisitance : max:28.6/kf
4. Unbalance resisitance: max 5%
5. Unbalance capacity: max 330pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 24AWG
2. Outer diameter: 6.1mm
3. Shielding material: AL foil
4. Earth wire: 24AWG bare copper  or CCA
5. Minimum bend radius: O.D.*6~8
6. Maximum pulling tension: 10kg
7. Jacket material:Â PVCÂ or LSZH
8. Roted temperature: -20~60ºC
9. Packing: Carton
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-Anylan;
3. Token ring;
4. ATM 155/ATM 622 etc;
STANDARD
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568-A-5
Â
Â
CAT6 FTP LAN CABLE, 4P, Solid
PRODUCT DESCRIPTION
1. The center conduction of the 4 pairs FTP Cat.6 cable is made of 23AWG bare
copper. This kind of cable also adopts PE material to be the dielectric, AL foil
to be the shield and fireproof material to be the jacket. Besides , the "+"
typer inner frame setted in the center is good for keeping the balance and
quality, which are so important for the cat.6 communication.
2. This Cat.6 FTP cable is conform to the related standards like ISO/IEC, TIA/EIA
and EN.
3. All the electrical characteristics are exceed the lastest Cat.6 standards
of ISO/IEC.
4. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Return resisitance: 14.9/100m
2. Impedance: 100±5
3. Static electric capacity: 46pF/m 1KHz
4. Unbalance capacity: 100pF/100m
5. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 23AWG
2. Outer diameter: 6.8mm
3. Shielding material: AL foil
4. Minimum bend radius: 60mm
5. Maximum pulling tension: 10kg
6. Jacket material: PVC/LSZH
7. Roted temperature: -20~60ºC
8. Packing: Carton or Axles
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-AnyLAN;
3. Token ring; ATM155/ATM622, etc.
STANDARD
1. ISO/IEC-11801 (2nd edition)
2. EN (2nd edition)
3. TIA/EIA-568B.2-1
Â
Â
FTP CAT6 outdoor lan cable ,4P, Solid
Specifications
1.0.56mm pure copper networking cable
2.Mainly used in computer connect
3.Jacket is PVC
Product Description:
Reference standard: ISO9001,CE ,ROHS
Bare solid copper conductor
RoHS complied PVC, PE or LSOH jacket
Complies to TIA/EIA-568B&ISO/IEC 11801
Application:
Ethernet, 10 Base-T, 100 Base-T4, ATM, TP-PMD Seppch, Telephone, Multimedia, Trunk Wiring
Cable Construction:
Conductor Dimension: 0.56mm
Core Dimension: 0.91mm 0.92mm
No. Of Pairs: 4 Â
Nom. OD: 5.3mm 14.0mm 13.0mm
Type of Jacket: PVC/PE PVC/PE PVC/PE
Electrical Characteristics:Â
Frequency(MHz): 1 4 10 20 31.25 62.5 100
Attenuation(dB/100m): 2.0 4.1 6.5 9.3 11.7 17.0 22.0
Impedance(ohm): 100 100 100 100 100 100 100
Return Loss(dB): 17 20 22 20 18 16 15
NEXT(dB/100m): 62.3 53.3 47.3 42.8 39.9 35.4 32.3
ELFEXT: (dB/100m): 61 49 41 35 31 25 21
PS NEXT(dB/100m): 62.3 53.3 47.3 42.8 39.9 35.4 32.3
PS ELFEXT: (dB/100m): 61 49 41 35 31 25 21
Packing:Â
1) Packing Lengths: 305m/roll
Other lengths available according to client's request.
2) Inner packing: Wooden reel, plastic reel, and paper reel available.
3) Outer packing: Carton box, pull out box, pallet available.
4) Other packing available according to client's request.
Â
Â
SFTP CAT5E lan cable,24AWG,4P,Solid Copper
SpecificationsÂ
Application Cable:TIA/IEA, ISO/IEO,568-A, 568-B
Solid Cable: SFTP,Cat5e.4p,Solid Copper
Insulation: Polyolefin,Medium Density Polyethylene
Drain Wire: Tinner Copper
Separator Tape: Synthetic Material
Shield: Aluminum-Mylar Tape
Â
Fabric |
Conductor O.D(mm) |
Insulation O.D(mm) |
Pairs |
Screem |
Completed Product O.D(mm) |
Sheath |
SFTP |
0.5/0.49 |
1.00 |
4 |
aluminium foil+copper wire braiding |
6.0 |
PVC/LSOH |
Product Performence
MHZ |
dB |
dB/100m |
NEXT dB |
PSNEXT dB |
ACR dB |
EKFEXT dB |
PSELFEXT dB |
0.722 |
19.4 |
1.8 |
74.1 |
64.0 |
65.0 |
66.0 |
63.0 |
1.0 |
20.0 |
2.0 |
67.7 |
62.3 |
63.0 |
63.0 |
60.8 |
4.0 |
23.0 |
4.1 |
60.2 |
53.34 |
52.0 |
51.7 |
48.7 |
8.0 |
24.5 |
5.8 |
59.2 |
48.8 |
46.0 |
45.7 |
42.7 |
10.0 |
25.0 |
6.5 |
57.9 |
47.3 |
44.0 |
43.8 |
40.8 |
16.0 |
25.0 |
8.2 |
55.5 |
44.3 |
39.0 |
39.7 |
36.7 |
20.0 |
25.0 |
9.3 |
53.5 |
42.8 |
37.0 |
37.7 |
34.7 |
25.0 |
24.3 |
10.4 |
51.8 |
41.3 |
34.0 |
35.8 |
32.8 |
31.25 |
23.6 |
11.7 |
46.7 |
39.9 |
31.0 |
33.9 |
30.9 |
62.5 |
21.5 |
17.0 |
44.7 |
35.4 |
21.0 |
27.8 |
24.8 |
100 |
21.0 |
22.0 |
38.1 |
32.3 |
13.0 |
23.8 |
20.8 |
Â
Â
SFTP CAT5EÂ outdoor lan cable,4P,Solid Copper
Specification:
Rated Temperature: -40°C ~ + 75°C
Wire Color Code:
Pair1:white/blue&blue Pair2:white/orange&orange
Pair3:white/green&green Pair4:white/brown&brown
Conductor: 26AWG or 24AWG Stranding ,Solid Bare copper
Insulation: HDPE
Drain Wire: 26AWG or 24AWG Stranding , Solid copper
Outer Shielded: AL-Mylar 100 %(min) coverage
Jacket: PVCÂ ,LSZH
Inner Jacket: HDPE
Impedance: 100±15% Ω at 1 ~100MHz
* Reference Standard: YD/T1019-2001,ANSI/TIA/EIA-568B,ISO/IEC11801
Cable assembly specification
Conductor |
Insulation |
Drain |
Shielded |
Outer Jacket |
Jacket |
AWG |
Specification mm |
Material |
Thickness (NOM.mm) |
Marerial |
Thickness (NOM.mm) |
OD (NOM.mm) |
Material |
Thickness (NOM.mm) |
 OD (NOM.mm) |
24 |
1/0.511 |
HD-PE |
0.18 |
1/0.511TC |
AL/Mylar |
PE |
0.60 |
5.5 |
PVC |
0.60 |
6.8 |
26 |
1/0.404 |
HD-PE |
0.18 |
1/0.404TC |
AL/Mylar |
PE |
0.60 |
5.3 |
PVC |
0.60 |
6.5 |
Â
Â
Â
CAT5E UTP LAN CABLE,Solid
PRODUCT DESCRIPTION
1. This kind of cable use bare copper to be the center conduction with the
specification is 24AWG and PE to be the dielectric. The jacket is made of
fireproof material, which is so meanful to the Cat.5e communication.
2. This Cat.5e UTP cable is conform to the SIO/IEC, TIA/EIA and EN standards and the
electrical characteristics are exceed the lastest Cat.5e standards.
3. LSZH: means "Low smoke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Static electric capacity: max:17.1nf/kf
3. Resisitance: max:28.6/kf
4. Unbalance resisitance: max 5%
5. Unbalance capacity: max 330pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 24AWG
2. Outer diameter: 5.0mm
3. Minimum bend radius: O.D.*4-6
4. Maximum pulling tension: 10.0
5. Jacket material: PVC/LSZH
6. Roted temperature: -20~60ºC
APPLICATION
1. 10/100/1000Mbps Ethernet
2. 100VG-AnyLAN
3. Token ring
4. ATM155/ATM622 etc
STANDARD
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568B
Â
CAT5E UTP LAN CABLE,4P, strander
Specification:
1.Copper diameter: 24AWG(7/0.2mm),26AWG(7/0.16mm),28AWG(7/0.12mm)
2. Outer diameter: 5.0mm
3. Minimum bend radius: O.D.*4-6
4. Maximum pulling tension: 10.0
5. Jacket material: PVC/LSZH
6. Roted temperature: -20~60ºC
7.Length :305m
8. Packing: Carton
APPLICATION:
1. 10/100/1000Mbps Ethernet
2. 100VG-AnyLAN
3. Token ring
4. ATM155/ATM622 etc
STANDARD:
1. ISO/IEC-11801
2. EN-50173
3. TIA/EIA-568B
Â
Â
CAT6 UTP LAN CABLE,23AWG,4P,Solid
PRODUCT DESCRIPTION
1. 4 pairs 100 Cat.6 cable, adopt 23AWG bare copper to be the center conduction, PE
to be the dielectric and fireproof material to be the jacket.
2. This cable is gray and conform to the standards like ISO/IEC, TIA/EIA and EN.
3. All the electrical characteristics are even exceed the lastest Cat.6 standards of
ISO/IEC. The "+" typer inner frame in the center ensures NEXT capacity and
reasonable minimum bend radius.
4. LSZH: means "Low somke zero halogen", which is the symbol of environmental
protection.
ELECTRICAL CHARACTERISTICS
1. Impedance: 100±15
2. Return resisitance: 9.4/100m
3. Unbalance resisitance: ≤5%
4. Static electric capacity: 51pF/m 1KHz
5. Unbalance capacity: 73.2pF/100m
6. Roted communicate rate: 65%
PHYSICAL CHARACTERISTICS
1. Copper diameter: 23AWG
2. Impedance: 100±15
3. Outer diameter: 6.1±0.2mm
4. Minimum bend radius: 6-8×OD
5. Maximum pulling tension: ≤10
6. Jacket material: PVCÂ or LSZH
7. Roted temperature: -20~60ºC
8. Packing: Carton or Axles
APPLICATION
1. 10/100/1000Mbps Ethernet;
2. 100VG-AnyLAN;
3. Token ring;
4. ATM155/ATM622 etc;
STANDARD
1. ISO/IEC-11801 (2nd edition)
2. EN (2nd edition)
3. TIA/EIA-568B.2-1
Â
Â
1UTP cat5e 25pair cable.25*2*0.5mm bare solid copper conductor,HDPE insulation,PVC jacket.
2.24/26AWG outdoor cable
3.copper/CCA/CCS/CCAM
4.UTP/FTP/SFTP
5.CE/RoHs/ISO9001
UTP 25pairs cables Cat5e 24AWG
 |
4-pair  UTP |
4-pair  FTP |
4-pair  STP |
4-pair  SFTP |
Conductor  |
24/26 AWG Copper |
24/26 AWG Copper |
24/26 AWG Copper |
24/26 AWG Copper |
Shielded |
Unshielded |
Al Foil shielded |
 |
Al Foil shielded+Weave shielded |
Insulation |
PE |
PE |
PE |
PE |
Outer PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
FR/PVC or LSOH PVC |
Using environment: indoor
Conductor Diameter: 0.51mm (±0.02 )  24AWG
Insulated Conductor Diameter: 0.93 ± 0.02
Jacket thickness:0.65mm
Jacket Different dimension and outer sheath colours upon request
Minimum bend radius:4 outer cable diameter
Conductor elongation: 14%
Rip cord breaking strength: 92N
Pulling Strength: 92N
Installation temperature:-5~50 (-23 ~ +122)
Operating temperature: -20~75 (-4 ~ +167)
Reference stand: TIA/EIA 568B
  multi pair lan cable
1.HDPE insulated
2.LSZH jacket
3.CE/SGS Rosh
package:305meter/Roll Packaged in boxes outside
Â
Â
Drop wire telephone cable
1)figure 8 and figure B or Figure D, 1.02mm copper or CCS, PE or 2)PE or PVC jacket
drop wire telephone cable
1.Conductor: 1.02mm or 0.64mm CCS or Bare copper. conductor diameter can be produced as per customer request.
2. PVC or PE jacket.
3. 500meters or 1000meters per roll.Â
1.PHYSICAL DIMENSIONS |
 |
 |
Diameter of Conductor,mm |
1.02mm +/-0.01 |
Min. insulation Thickness.mm |
1.00mm |
OVERALL DIAMETER |
Major .MM |
6.85-7.50 |
Minor.MM |
3.85-4.5 |
H.PHYSICAL TESTS |
 |
 |
A.Conductor |
 |
 |
Elongation, % |
1.5 |
Tensile strength,kg/mm2 |
128 |
B.Insulation |
 |
Elongation, % |
7.5 |
Tensile strength,kg/mm2 |
0.0186 |
ELECTRICAL TESTS |
 |
Conductor Resistance,ohm/KM |
80.4 |
Â
800 Puffs Vape
800 Puffs Vape,Electronic Smoke,Puff Bar Electronic Cigarette,Pure Smoke Electronic Cigarette
Guangzhou Yunge Tianhong Electronic Technology Co., Ltd , https://www.e-cigaretteyfactory.com