EVG launches three-furnace EVG520L3 wafer bonding system

EVG is an Austrian manufacturer of wafer bonding and lithography equipment, and the EVG500 series recently introduced a new wafer bonding system. The EVG520L3 system includes three chambers that combine the advantages of temperature control, piston force uniformity and modularity in this series of devices. The concept of this cavity combination meets the need for high vacuum. The company said that the CMOS-compatible bonding process will significantly increase throughput, cost of ownership and yield.

EVG senior technical director Paul Lindner said that the EVG520L3 is a next-generation wafer bonding device developed on the basis of feedback from customers. It brings together the results of EVG's many years of development. The design of the cavity is relatively stable and the component replacement is small; the bond module is fully matched to the EVG540 single cavity and Gemini integrated wafer bonding system. Furthermore, bond chucks are also matched to Gemini and EVG600 series aligners. This helps customers speed up time-to-market and reduce the cost of ownership of wafer bonding processes.

In the actual process, the three cavities are paralleled to achieve uniform quality and uniformity. The simultaneous stacking of three substrate wafers means that the EVG520L3 needs to be compatible with wafers of various materials. This design concept is relatively novel, including the use of front and rear bonding processes, baking and gas supply and supply separation, high vacuum operating environment, pre-bond cooling, and faster bonding time (high vacuum environment is three times the original, The ultra-high vacuum is 5.5 times the original).

Air conditioner Split Valve is an important part of the split air conditioner, which is used for connecting the outdoor unit and the indoor unit,closing or opening the refrigerant circuit,extracting or filling refrigerant. Our split valve is easy to operate.Use soft seal and hard sea to ensure the sealing performance. It is for R22,R134A,R410A,R407C,R32 etc in -30℃-+120℃. The maximum working pressure is 4.2MPA.The structure and dimension is customizable according to your design, ensuring customers are getting the right fitting for their needs.Our parts have been exported to over 50 countries all over the world.

Split Valve

Shut Off Valve,Copper Split Valve,Brass Split Valve,Split Valve For Charging

ZHEJIANG ICE LOONG ENVIRONMENTAL SCI-TECH CO.,LTD. , http://www.ice-loong.com