The two most expensive and highest-power LED lighting applications are the backlighting and headlights of large-screen LCDTV displays. Take a look at the standard LED car headlights used by Lexus, Audi, and even GM's Cadillac Escalade. The overall lighting structure of all these cars is very similar. Each automotive headlamp includes five LED-powered beams optimized for a variety of lighting requirements, including: low beam, high beam, turn assist lights, daytime running lights, and turn signal indicators.
Standard LED illumination beams typically will require 35W to 50W of power. This may not seem like a lot of power; however, LEDs provide 10 times the brightness of HID halogen lamps, so the LED's light output is equivalent to a 500W halogen lamp. The power required for a high beam is generally the same or slightly higher than a standard illumination beam, while the power required for a turn assist light, a daytime running light, and a turn signal indicator is lower. However, the overall automotive headlamps consume more than 200W of electrical energy, which may cause significant thermal power dissipation problems. This is really not a good thing, because as the operating temperature increases, the light output and working life of the LED will decrease rapidly.
There are many ways to deal with this heat dissipation problem. One is to add a large number of heat sinks to remove heat from the lights. However, this creates another set of problems, including an increase in cost and weight due to the use of heat dissipating materials. The most effective way to solve this problem is to use a very efficient driver (>93% efficiency) to minimize the heat dissipation of the LED driver circuit. This is not as difficult as it sounds, because a 50W high beam can usually consist of 14 1ALEDs in series. Since the forward voltage drop over the entire temperature range is approximately 4V per LED, the boost converter LED driver topology can boost the nominal battery voltage of 12V to just over 56V with 93% efficiency. This makes it only need to dissipate With a power of 3.5 W, for this power dissipation value, a low-grade copper heat sink can be easily placed in a printed circuit board on which an LED headlight is mounted.
SATA cable is a type of data cable used to connect storage devices, such as hard disk drives (HDDs), solid-state drives (SSDs), or optical drives, to a motherboard or host controller. SATA is a widely used interface in modern computers for connecting internal storage devices. Besides, SATA cable has many advantages such as High Data Transfer Rates,Scalability,Backward Compatibility,Simplicity and Ease of Use,Cost-Effective Solution and Widespread Industry Adoption, etc.
Applications
Desktop Computers
Laptop Computers
Workstations
Servers
Storage Arrays
Gaming PCs
Home Servers and NAS (Network Attached Storage)
Media Centers
Industrial Computers
Embedded Systems
Educational and Research Environments
External Storage with eSATA
data sata,sas to sata,15pin sata,4 x sata,connector sata
Dongguan Aiqun Industrial Co.,Ltd , https://www.gdoikwan.com