Yzr Slip Ring AC Motor for Crane

Model NO.: YZR
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Crane Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H112~H355
Work Mode: S1
Protection Class: IP55
Insulation Class: F
Trademark: pinnxun
Specification: YZR
Origin: China
HS Code: 8501530090
Model NO.: YZR
Starting Mode: Direct on-line Starting
Certification: CE, ISO, CCC
Brand: Pinnxun
Type: Slip Ring Crane Motor
Protect Feature: Enclosed
Structure: Asynchronous Motor
Phase: Three Phase
Color: Grey or Other
Shape: Linear
Scope of The Center Height: H112~H355
Work Mode: S1
Protection Class: IP55
Insulation Class: F
Trademark: pinnxun
Specification: YZR
Origin: China
HS Code: 8501530090
YZR, YZ series metallurgical and crane ac induction motor

1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.

3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.

Working		 S2 S3
6/  6times/hour
FC 30 30minutes 60 60minutes 15% 25% 40%
 
item		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 Tm
Tn

Item frame		 1000r/min  synchronous speed 1000r/min
YZR 112M 1.8 5.3 13.4 815 1.5 4.63 12.5 866 2.2 6.6 18.4 725 1.8 5.3 13.4 815 1.5 4.63 12.5 2.5
132M1 2.5 6.5 12.9 892 2.2 6.05 12.6 908 3.0 8 16.2 855 2.5 6.5 12 892 2.2 6.05 12.6 2.86
132M2 4.0 9.7 14.2 900 3.7 9.2 14.5 908 5 12.3 18.2 875 4 9.7 14.2 900 3.7 9.2 14.5 3.51
160M1 6.3 16.4 29.4 921 5.5 15 25.7 930 7.5 18.5 35.4 910 6.3 16.4 29.4 921 5.5 15 15.7 2.56
160M2 8.5 19.6 29.8 930 7.5 18 26.5 940 11 24.6 36.5 900.8 8.5 19.6 29.8 930 7.5 18 16.5 2.78
160L 13 28.6 31.6 942 11 24.5 27.6 957 15 34.7 39 920 13 28.6 31.6 942 11 24.9 27.6 2.47
180L 17 36.7 49.8 955 15 33.8 46.5 962 20 42.6 58.7 946 17 36.7 49.8 955 15 33.8 46.5 3.2
200L 26 56.1 82.4 956 22 49.1 69.9 964 33 62 68 942 26 56.1 82.4 956 22 49.1 69.9 2.88
225M 34 70 85 957 33 62 74.4 962 40 80 101 947 34 70 85 957 30 62 74.4 3.3
250M1 42 80 103 960 37 70.5 91.5 965 50 99 123 950 42 80 103 960 37 70.5 91.5 3.13
250M2 52 97 110 958 45 84.5 95 965 63 121 134 947 52 97 111 958 45 84.5 95 3.48
280S 63 118 142 966 55 101.5 129.8 969 75 144 169.5 960 63 118 142 966 55 101.5 119.8 3.0
280M 85 157 140 966 75 139 124 970 100 185 166 960 85 157 140 966 75 139 124 3.2
750r/min  synchronous speed 750r/min
YZR 160L 9 22.4 28.1 694 7.5 19.1 23 705 11 27.5 35.3 679 9 22.4 28.1 694 7.5 19.1 23 2.73
180L 13 29.1 47.8 700 11 27 44 700 15 34 56 690 13 29.1 47.8 700 11 27 44 2.72
200L 18.5 40 67.2 701 15 33.5 53.5 712 22 48 81 690 18.5 40 67.2 701 15 33.5 53.5 2.94
225M 26 55 71.2 708 22 46.9 59.1 715 33 70 92 696 26 55 71.2 708 22 46.9 59.1 2.96
250M1 35 64 80 715 30 63.4 67.7 720 42 75 97.5 710 35 64 80 715 30 63.4 68.8 2.64
250M2 42 86 79 716 37 78 70 720 52 103 98 706 42 86 79 716 37 78.1 70 2.73
280S 52 108 106 712 45 96.5 92 717 63 129 130 704 52 108 106 712 45 96.5 92 3.17
280M 63 126 110 722 55 110.5 92.5 725 75 150 132 715 63 126 110 722 55 110.5 92.5 2.85
315S 85 164.8 177.8 722 75 146.7 156.7 725 100 200 162 715 85 164.8 177.8 722 75 146.7 156.7 2.94
315M 100 190 18.35 715 90 172 160.9 720 125 250 232 717 100 190 183.5 715 90 172 160.9 3.13
600r/min  synchronous speed 600r/min
YZR 280S 42 92 177.1 571 37 84.8 153.2 560 55 112 235.2 564 42 92 177.1 571 37 84.8 153.2 2.80
280M 55 127 207 556 45 103.8 165 560 63 146 241 548 55 127 207 556 45 103.8 165 3.16
315S 63 132 161.9 580 55 118.3 138.7 580 75 154 194 574 63 132.5 161.9 580 55 118.3 138.7 3.11
315M 85 179 171 576 75 160 149.3 579 100 210 203 570 85 179 171 576 75 160 149.3 3.45
355M 110 232 246 581 90 192 198 585 132 284 299 576 110 232 246 581 90 192 198 3.33
355L1 132 265 256 576 110 224 207 582 160 324 314 571 132 265 256 578 110 224 207 3.1
355L2 150 292 238 588 132 278 206 588 185 374 296 585 150 292 238 588 132 278 206 3.4
YZR, YZ series metallurgical and crane ac induction motor

1. General
1.1 YZR and YZ series wound rotor and squirrel-cage rotor three-phase asynchronous motor for lifting and metallurgy is suitable for the power drive of the lifting machine and other similar equipment, with high overload capability and mechanical strength, and it is also suitable for short-time or intermittent character of service, the equipment with frequent starting, braking and obvious shock and impact.
1.2 The power grade and the installation dimensions of the motor are in accordance with the recommended standard of IEC 72; The correlation between the power grade and the installation dimensions is similar with Japan JEM1202 and Germany DIN42681, most of which can be exchanged. YZR series wound rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the specification of professional standard JB/T10105-1999 and YZ series squirrel-cage rotor three-phase asynchronous motor for metallurgy and lifting is in accordance with the professional standard.
2. Operation condition
The motor can run normally when the elevation not more than 1000m. The environment temperature for class F is from -20 to 40 Celsius degree, for H class from -20 to 60 Celsius degree. Relative humidity less 90%.

3. Basic mode
Rated voltage: 380V rated frequency: 50HZ.
Protection grade: IP44 or IP54 insulation level: F or H
Cooling mode: IC410 or IC411
Base operating duty: S3-40%
Installation mode of the motor: B3(112-450), B5(112-250), V1(112-315)
Note: The following are optional: Over-temperature protection, dampproof heating belt, electromagnetism brake, coder, overspeed switch.


Our Servies

WE ARE READY

Q: Do you offer OEM service?
A: Yes.

Q: What is your payment term?
A: 30% T/T in advance, 70% before delivery. Or irrevocable L/C.

Q: What is your lead time?
A: About 10-45 days after receiving deposit or original L/C.

Q: What certifiicate do you have?
A: We have CE, ISO, CCC and so on.


WHY CHOOSE US

WHAT WE DO AT PINNXUN
Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.

Working		 S2 S3
6/  6times/hour
FC 30 30minutes 60 60minutes 15% 25% 40%
 
item		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 n
r/min		 Pn
Kw		 I1
A		 I2
A		 Tm
Tn

Item frame		 1000r/min  synchronous speed 1000r/min
YZR 112M 1.8 5.3 13.4 815 1.5 4.63 12.5 866 2.2 6.6 18.4 725 1.8 5.3 13.4 815 1.5 4.63 12.5 2.5
132M1 2.5 6.5 12.9 892 2.2 6.05 12.6 908 3.0 8 16.2 855 2.5 6.5 12 892 2.2 6.05 12.6 2.86
132M2 4.0 9.7 14.2 900 3.7 9.2 14.5 908 5 12.3 18.2 875 4 9.7 14.2 900 3.7 9.2 14.5 3.51
160M1 6.3 16.4 29.4 921 5.5 15 25.7 930 7.5 18.5 35.4 910 6.3 16.4 29.4 921 5.5 15 15.7 2.56
160M2 8.5 19.6 29.8 930 7.5 18 26.5 940 11 24.6 36.5 900.8 8.5 19.6 29.8 930 7.5 18 16.5 2.78
160L 13 28.6 31.6 942 11 24.5 27.6 957 15 34.7 39 920 13 28.6 31.6 942 11 24.9 27.6 2.47
180L 17 36.7 49.8 955 15 33.8 46.5 962 20 42.6 58.7 946 17 36.7 49.8 955 15 33.8 46.5 3.2
200L 26 56.1 82.4 956 22 49.1 69.9 964 33 62 68 942 26 56.1 82.4 956 22 49.1 69.9 2.88
225M 34 70 85 957 33 62 74.4 962 40 80 101 947 34 70 85 957 30 62 74.4 3.3
250M1 42 80 103 960 37 70.5 91.5 965 50 99 123 950 42 80 103 960 37 70.5 91.5 3.13
250M2 52 97 110 958 45 84.5 95 965 63 121 134 947 52 97 111 958 45 84.5 95 3.48
280S 63 118 142 966 55 101.5 129.8 969 75 144 169.5 960 63 118 142 966 55 101.5 119.8 3.0
280M 85 157 140 966 75 139 124 970 100 185 166 960 85 157 140 966 75 139 124 3.2
750r/min  synchronous speed 750r/min
YZR 160L 9 22.4 28.1 694 7.5 19.1 23 705 11 27.5 35.3 679 9 22.4 28.1 694 7.5 19.1 23 2.73
180L 13 29.1 47.8 700 11 27 44 700 15 34 56 690 13 29.1 47.8 700 11 27 44 2.72
200L 18.5 40 67.2 701 15 33.5 53.5 712 22 48 81 690 18.5 40 67.2 701 15 33.5 53.5 2.94
225M 26 55 71.2 708 22 46.9 59.1 715 33 70 92 696 26 55 71.2 708 22 46.9 59.1 2.96
250M1 35 64 80 715 30 63.4 67.7 720 42 75 97.5 710 35 64 80 715 30 63.4 68.8 2.64
250M2 42 86 79 716 37 78 70 720 52 103 98 706 42 86 79 716 37 78.1 70 2.73
280S 52 108 106 712 45 96.5 92 717 63 129 130 704 52 108 106 712 45 96.5 92 3.17
280M 63 126 110 722 55 110.5 92.5 725 75 150 132 715 63 126 110 722 55 110.5 92.5 2.85
315S 85 164.8 177.8 722 75 146.7 156.7 725 100 200 162 715 85 164.8 177.8 722 75 146.7 156.7 2.94
315M 100 190 18.35 715 90 172 160.9 720 125 250 232 717 100 190 183.5 715 90 172 160.9 3.13
600r/min  synchronous speed 600r/min
YZR 280S 42 92 177.1 571 37 84.8 153.2 560 55 112 235.2 564 42 92 177.1 571 37 84.8 153.2 2.80
280M 55 127 207 556 45 103.8 165 560 63 146 241 548 55 127 207 556 45 103.8 165 3.16
315S 63 132 161.9 580 55 118.3 138.7 580 75 154 194 574 63 132.5 161.9 580 55 118.3 138.7 3.11
315M 85 179 171 576 75 160 149.3 579 100 210 203 570 85 179 171 576 75 160 149.3 3.45
355M 110 232 246 581 90 192 198 585 132 284 299 576 110 232 246 581 90 192 198 3.33
355L1 132 265 256 576 110 224 207 582 160 324 314 571 132 265 256 578 110 224 207 3.1
355L2 150 292 238 588 132 278 206 588 185 374 296 585 150 292 238 588 132 278 206 3.4

Wired Game Headphones

For esports headsets, USB jack is used, the traditional 3.5mm headphone jack design does not appear acoustic positioning sense, pay more attention to surround sound, design field is different. Wired Game Headphones definitely have lower latency than Wireless Gaming Headphone for Gaming Headphones. Usually use magnetic ring shielding, tensile line design.

Common esports headsets use an all-inclusive design,which has the advantage of isolating ambient noise.The headband part of the earphone will be different from each type of earphone.The strength of the headband will determine whether it will compress the head after wearing, whether it is breathable and other details.

Common esports headphones will be equipped with switch adjustment. When choosing, you can give priority to products that support 7.1 sound channel, consider supporting light switching, and consider supporting acoustic positioning function. Usually tap earphones will also come with a microphone design. Consider models with high sensitivity and acoustic noise reduction.

The online esports headphones are mainly USB ports, and the independent sound card design is mainly used to create virtual sound effects and positioning effects. The use of esports headphones will inevitably appear cool light effect, headset light, microphone light, RGB light belong to the current mainstream design.




01 2

Wired Game Headphones,Wired Gaming Earphones,Gaming Wired Earbuds,Wired Pc Headset With Mic

Henan Yijiao Trading Co., Ltd , https://www.yjusbhubs.com