Three problems to restore the most authentic Divine X1 experience

Infinite fun without as much as possible - three problems to restore the most authentic Divine X1 experience

Is God X1 beautiful? Is God drawing X1 easy to use? Is X1 fun?

Out of the expectation of the above three problems of the artifact of God painting, he applied for the first batch of trials. The results revealed that he found himself shocked and he was very fortunate. As the saying goes, good food is not afraid of late, but waiting is always long (actually good, but time relativity, you know). Fortunately, finally in the middle of the May 2 holiday, I received a long-lost god painting X1 trial engineering machine. . First of all share the open box diagram, receive the courier, open the packaging is always the most embarrassing and excited.



Of course, I do not intend to enjoy this happiness alone. I have tried it for a few days and I feel very deep. It also makes me feel that I have the responsibility to share my knowledge and understanding of divine paintings as soon as possible. In order to make everyone see clearly, he also specifically hired someone to borrow special equipment. (Look at the "going heart" in this way, everyone will definitely support it.)



As a user's point of view, I intend to use my opinions and suggestions from the perspective of the user to try out God’s paintings from the perspective of their own. They also share with the official nectar and divine paintings to let everyone understand objectively and hope to promote God’s paintings. The better is, of course, self-initiative, write it out and communicate with everyone, and if anything, call for the parties to use dialogue to resolve disputes.

At the same time, in order to make it easier to read and understand, I decided to first offer the entire guideline of my assessment. I think this review mainly answers the first three questions.



First, the visual department - God painting X1 look good

(a) how to look

Today, consumer electronics are rich in product categories and compete fiercely with each other. In addition to these hard indicators of performance configuration, the industrial design of the product itself has become one of the main factors for user selection. Like many people, I am also very concerned that God X1 looks good?

1. Packing

The outer package is quite satisfactory, it is a rectangular box of a single-layer corrugated box, but it opens up inside.



God painted a pure white box, the cover is simple and generous, there is no extra element to decorate, but there is a simple sense of simplicity is not simple. I personally think that the appearance of this package is good.



The interiors are all white packaging designs. Each single piece is packed in boxes instead of being scattered. This detail is very good, but it is structured and orderly.



Personal advice on packaging:

1 The internal single box can be printed with God painting LOGO, will look better, now is pure white, a bit like. . . It's a bit like a box of toothpaste combs in hotels.

2 As a supporting and filling part of the cardboard design of a complex folding method, the style is also more tedious, the problem is that even put the myth of the put out and put it back is a bit laborious, you can improve the more concise.

3 with instructions.

2. Machine body

The specific size and parameters we see the official release of data, I will talk about the observations I got. The painting host uses engineering plastic shells. My engineering machine is silver and looks very beautiful. The power supply, headphone, TF card, USB interface are on both sides of the machine. The front side is a projection lens and a virtual touch light-sensitive lens. There are two heat dissipation holes on the back and side, and the machine switch is on the back. The entire design does not have too many modifications. The layout of each layout on the mainframe is really useful. I think this reflects the pragmatic style of divine painting. Multiple angles to show you the close-up of the big picture of the gods.











To see the details, well, macro close-up. From the details, the industrial design of the Divine X1 is still very meticulous. The paint is beautiful and uniform. Although it is a bright surface, it is not a kind of high-light that does not look good, is easy to stick to fingerprints, and is particularly dirty, but is slightly grainy. The feeling is very beautiful and practical. There are no burrs at the joints, no misalignment of the interface, and the switch feels stable and free from loosening. The individual feels that the work is absolutely solid enough.





Host personal advice:

1 The power interface is quite inconvenient, especially if you want to cast it vertically. Some games are also vertical, and the side power is empty. It is recommended that you drop it behind.

2 Headphone jack, TF card, and USB port are recommended to cover and protect. Otherwise, it is easy to enter the sundries and do not use for a long time.

3 This switch. . . A little bit. . . It's too common to recommend improvements. A little bit higher, such as metal, small dots, or the type of buttons on a cell phone that long presses on or off.

3. Touch

Virtual touch has always been the high-end function of the divine painting, and the important peripheral for this function is the stylus. The stylus is a silver shell, black panel, the overall size is moderate, thick and appropriate, good grip.



Specially studied the principle of this touch, relying on a number of professional foundations, or find out clearly, this is indeed a very good and effective way. The specific details of the hahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahad$aaaaaaaa.




Stylus personal advice:

1 The two most used keys for the stylus pen are the confirmation and return keys. When the right hand is operated, the thumb is switched from the confirmation key to the return key, which is a little distant, and the hand's small estimate must be moved to reach. It is recommended to configure the home key location to return.

2 The same as the host button, the side of the standby button, replaced by metal, will be a little higher.

4. Accessories

There are two accessories to be said, one is a stand and the other is a power supply. This bracket leg is made of aluminum alloy and the frame is made of plastic - this gives it its natural elasticity and just stuck in the X1 console. The entire bracket and the divine painting are consistent in color, and it is very convenient to fit the host. Listening to Xiao Xian said that the earliest batch of stents has not yet been made. Haha, it seems that it is still worthwhile. This Dongdong is sincere and convenient. Seeing that the report has been exhausted, various methods have been used to draw the gods and paintings. Artifact. I heard that there is a more high-end shelf in the bedroom of God painting, which is the one that appears on the video. I hope it will be used. Or look at this shelf first.

Together it is this:



The support is this:



Usage is this:



Another accessory to explain is the power supply. God painted the trial is a high-power highlight LED, its drive current is still very large, heat dissipation is also mainly the heat of this LED. The nominal power is 12V/2.5A. This is also understandable.




Personal advice on fittings:

1) The bracket is awesome, and it is recommended that the production volume be standard.

2) The power line segment is big. Although there is no way to achieve high power, there is still the possibility of doing small points. In addition, the power connector is straight, and it is recommended to change the corner bend, which can save a lot of space.

(b) Display effect



As a product using projection display, the display effect of Divine Painting has always been the focus of my attention. The core, or directly affecting experience, is brightness, contrast, color, brightness, trapezoid, resolution and other factors. . Do not be busy watching the officials, and try them one by one. Here I need to use some tools, I use the 360 ​​flat guards, Master Lu, security Bunny and androidsensor, and rulers, tape measure, with a sense of light and other mobile phone tools.

1. Brightness

Illumination curve

Brightness is one of the biggest bottlenecks that affect projection, especially micro-projection. Many micro-projections win in the concept, but die in brightness. In terms of intuitive feeling, I have to admit that the brightness of the X1 is more than I expected. The first time I turned on the camera, it made me shine. However, there is no such effect, and there is always something that is convincing.

An android system sensor detection software is installed on the mobile phone, and the contrast is numerically described. Just as my Lenovo K860 mobile phone has a light sensor, in the dark at 12:00 at night, the initial value of the light sensitivity of the mobile phone is 0 lumens. From the distance of 0m from the projection lens to 2.5 meters, we got the X1 illumination curve of the god painting. It can be seen that the brightness falls rapidly with the distance, but at 2.5 meters, the brightness is still up to 105 lux. This basically reaches the general level Commercial projection brightness. It may not be intuitive to see how bright and dark the 105lux is. In my room there are two 40W fluorescent lamps mounted on the ceiling. When all are turned on, the illuminance is measured on the ground between the two lamps, which is 110lux. It should be said that it is still very impressive.

Environmental contrast

Of course, although the above values ​​are quantified, they can be easily compared. However, in the end, what the effect is, or to see the real picture is the most clear. Because the room if the curtains give a good light shading effect, it may also be almost completely black, and if the curtains are not for the power, then the light transmission is also different and not comparable, so only the contrast between the on and off lights is compared here.




After turning off the lights:





After turning off the lights:



2. Color

The screen test of the hardware evaluation tool can test the effects of various colors. The SLR used is still very good, so the picture effect is basically the effect I see on the wall.




3. Contrast

Contrast display I do not know how to make everyone more intuitive experience, but fortunately Lu master with a grayscale test, its display can let everyone see more intuitive results.




4. Brightness

The automatic focusing function of Divine Design is indeed very convenient. In the case of just turning on the power, changing the distance, changing the angle, and changing the pitch, etc., the automatic focusing can be started and adjusted in time. The effect of adjustment is better than that of the manual adjustment. To be in place.




5. Ladder

For trapezoidal distortion - this situation is easy to appear with the host's pitch - God painting X1 designed a trapezoidal correction function, the scope of the correction should be still very large.





6. Resolution

Divine X1's nominal resolution is a standard resolution of 854x480, and the highest resolution supported is 1920x1080. To be honest, it is more than enough for general viewing applications.



In order to make everyone see more clearly, I compared the size of the 2.5m distance and the size of the wall with a chair.



Tilting down so big, the 854x480 liquid crystal display can already see the graininess. I took this effect with a macro, but it needs to be explained that this is a camera shot from macro and I'll see it together. Really clear, from the screen more than 0.5m, basically can not see it.



Display personal advice:

1) When the ambient light is strong, the auto-focusing function will have obvious misalignment problems. It is recommended to optimize this problem.

Second, the operation chapter - God painting X1 easy to use it

(a) Hardware aspects

1. Machinery

Installation and storage

The front packaging diagram should be clearly visible. The storage of the divine painting is very convenient. There are not many elements in it. The position of each part is also reserved in the box. One by one, very neat.




Fixed carry

God painting nominal body size 1428828mm, host weight 220g, due to the use of plastic shell, the entire device is not in the hands, holding in the hands is not, do not account for the place on the table, used to pack up is also very convenient Fast. However, limited by the internal light machine, circuit board size, 28mm thickness, really hung in the pocket, is still quite large. Fortunately, the projection is not for squatting, is it not?




Operational control

Because God draws its own operating system, there is no need to connect a video cable like a traditional projection. Therefore, there are actually three installation steps for the divine painting: inserting the bracket, connecting the power supply, and booting. This kind of fool-style operation is a popular weapon of mass destruction.




button

The main operation buttons of the Divine X1 are on the virtual touch pen. The stylus has 7 keys in total, which are confirmation, home, return, zoom, switch, standby, volume plus/minus keys. This standby key should not be misunderstood. It is not the standby of the stylus, but the click of the stylus. The projection turns off the light. Heat dissipation, and then press start, it is very convenient.




2. Electronics

Configuration

God painting is equipped with a depth of customization of Android4.2 operating system, known as a 4-core processor, the specific performance configuration in the end how, I asked out the 360 ​​flat guards and Lu master pad version, evaluation of the X1 God pictures. The result was really bright! ! !

360 flat guards gave 10993 points, ranking 5th.



Lu Master Pad version gave 10,946 points, over 87% of other users.




battery

God painting host is without battery, I posted on the forum specifically, and hope that X2 and follow-up can be considered, with the battery of God paintings, think that they feel Hyun is too much! Virtual stylus with battery, 1000mah battery, nominal standby 700 hours, use about 30 hours, the actual use of the process, when there is no stylus operation for a long time, the stylus will enter its standby state, saving power, This design is very intimate and practical. I speculated that the use of a 5mm infrared LED in a post, get a closer look, than the infrared LED to a lot of high-end, should be an infrared band semiconductor laser, have to say, too cattle! However, according to time projections, the lighting current should also be around 30ma.

Peripherals

God painting comes with an audio speaker, but I have to say that its effect is similar to that of a speaker on a mobile phone. Using it for a temporary movie can still be possible, but if you want to pursue good results, external audio equipment becomes very necessary. Haha, fortunately, I had a Bluetooth speaker in the nectar forum event. The effect was really leveraged! Coupled with wireless routing, basically a set of unlimited home theater has taken shape! Because God draws its own Bluetooth function, the external Bluetooth mouse and keyboard are not to mention, but they are not on hand, and they cannot try to share it.




Hardware personal advice:

1) Can divine paintings be smaller and thinner? ?

2) We hope that X2, X3... can have built-in battery.

3) Sometimes the auto focus function will be inaccurate due to ambient light. For example, in the process of watching movies, if the projection position and angle are adjusted, the auto focus will be re-adjusted, but sometimes this will be blurred. If you want to start autofocus again, you must return to the desktop to enter the settings and close. Then turn on the automatic focus or select manual focus, and then go back, and some movies have to be re-buffered, which greatly affects the experience. It is recommended to add a button to start automatic focusing on the machine or change the standby button on the stylus to a short press to start automatic focusing and long press standby.

(b) Firmware system

Characteristic settings

To be honest, when I get the trial machine, I open the system settings and see the deeply developed operating system. I don’t have any opinions on all the waits—it’s really a matter of time, and a lot of functions for projection are added, modified, Deductions and enhancements are really making a "take heart" product. Specifically, I don't have much to say. Let's share it for you.
WIFI settings




Bluetooth settings



Automatic focusing




Manual focusing




Hand mark







Keystone correction




Stylus pairing



T25 Series Terminal Blocks

T25 Series Terminal Blocks,Pp Terminal Blocks,Brass Block Terminal,Pa66 Terminal Blocks

Jiangmen Krealux Electrical Appliances Co.,Ltd. , https://www.krealux-online.com