Model NO.: 0cr25al5
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: Ualloy
Status: Oxidized
Density: 7.1
Resisivity at 20oc: 1.42±0.06 Ohm mm2/M
Tensile Strength: 637~784 MPa
Trademark: ualloy
Transport Package: Wooden Case
Specification: ISO9001, ISO14001
Origin: China
HS Code: 85149090
Model NO.: 0cr25al5
Material Shape: Round Wire
Range of Application: Cold-Resistant
Certification: ISO9001
Brand: Ualloy
Status: Oxidized
Density: 7.1
Resisivity at 20oc: 1.42±0.06 Ohm mm2/M
Tensile Strength: 637~784 MPa
Trademark: ualloy
Transport Package: Wooden Case
Specification: ISO9001, ISO14001
Origin: China
HS Code: 85149090
High-resistivity Fecral Insulation Heating Wire
Description:
With the high quality iron chrome aluminum for matrix, by pre - oxidation technology
treatment of the surface insulation resistance then tightly wound forming.Thermal efficiency increased by more than 20%.
                                             0Cr25Al5
Chemical Content(%)
C |
P |
S |
Mn |
Si |
Cr |
Ni |
Al |
Fe |
Other |
Max0.06 |
Max 0.025 |
Max 0.025 |
Max 0.70 |
Max 1.0 |
23.0~26.0 |
Max 0.60 |
4.5~6.5 |
Bal. |
- |
Â
Mechanical Properties
Max Continuous Service Temp |
1250ºC |
Resisivity at 20ºC |
1.42±0.06 ohm mm2/m |
Density |
7.10Â g/cm3 |
Thermal Conductivity |
46.1KJ/m·h·ºC |
Coefficient of Thermal Expansion |
16.0×10-6/ºC |
Melting Point |
1500ºC |
Tensile Strength |
637~784Â Mpa |
Elongation |
Min 12% |
Section Variation Shrink Rate |
65~75% |
Repeatedly Bend Frequency |
Min 5 times |
Continuous Service Time |
- |
Hardness |
200-260HB |
Micrographic Structure |
Ferrite |
Magnetic Property |
Magnetic |
Feature:
With long service life.Heating up fast.High thermal efficiency.Temperature uniformity. Can use vertically. When being used in the rated voltage,there is no volatile matter.It i the ne environmental protection electric heating wire.And an alternative to the costly nichrome wire.Can be customized according to customer requirements
Usage:
It is widely used in industrial furnace, household electrical appliances, infrared heater, etc.
The key properties:
1.The thickness of surface insulation resistance to oxidation layer: 5-15 μ m.
2. Insulation resistance: multimeter detection infinity.
3.The voltage-endurance of insulating single layer is greater than the alternating voltage 60 ν without breakdown.
4. The use of voltage: 6-380 ν.
5. Using temperature: Maximum1200 ºC
6. Service life: not less than 6000 hours.
7.Thermal shock performance: Electric heating element can withstand the cold and hot impact 600-6000 times without deformation.
High-resistivity Fecral Insulation Heating Wire
Description:
With the high quality iron chrome aluminum for matrix, by pre - oxidation technology
treatment of the surface insulation resistance then tightly wound forming.Thermal efficiency increased by more than 20%.
                                             0Cr25Al5
Chemical Content(%)
C |
P |
S |
Mn |
Si |
Cr |
Ni |
Al |
Fe |
Other |
Max0.06 |
Max 0.025 |
Max 0.025 |
Max 0.70 |
Max 1.0 |
23.0~26.0 |
Max 0.60 |
4.5~6.5 |
Bal. |
- |
Â
Mechanical Properties
Max Continuous Service Temp |
1250ºC |
Resisivity at 20ºC |
1.42±0.06 ohm mm2/m |
Density |
7.10Â g/cm3 |
Thermal Conductivity |
46.1KJ/m·h·ºC |
Coefficient of Thermal Expansion |
16.0×10-6/ºC |
Melting Point |
1500ºC |
Tensile Strength |
637~784Â Mpa |
Elongation |
Min 12% |
Section Variation Shrink Rate |
65~75% |
Repeatedly Bend Frequency |
Min 5 times |
Continuous Service Time |
- |
Hardness |
200-260HB |
Micrographic Structure |
Ferrite |
Magnetic Property |
Magnetic |
Feature:
With long service life.Heating up fast.High thermal efficiency.Temperature uniformity. Can use vertically. When being used in the rated voltage,there is no volatile matter.It i the ne environmental protection electric heating wire.And an alternative to the costly nichrome wire.Can be customized according to customer requirements
Usage:
It is widely used in industrial furnace, household electrical appliances, infrared heater, etc.
The key properties:
1.The thickness of surface insulation resistance to oxidation layer: 5-15 μ m.
2. Insulation resistance: multimeter detection infinity.
3.The voltage-endurance of insulating single layer is greater than the alternating voltage 60 ν without breakdown.
4. The use of voltage: 6-380 ν.
5. Using temperature: Maximum1200 ºC
6. Service life: not less than 6000 hours.
7.Thermal shock performance: Electric heating element can withstand the cold and hot impact 600-6000 times without deformation.
Tuning Fork Level Switch
The tuning fork level switch is also often referred to as the tuning fork level meter or the tuning fork level controller, mainly because the tuning fork level meter appears in different links in industrial production, and actually plays different key roles, so people are habitual called many different names. Tuning fork level switch is a kind of level switch. It mainly uses the resonance principle of tuning fork to measure the level state. Its unique fork body design and its inherent vibration characteristics can ensure the automatic cleaning function of the tuning fork and prevent material hanging to the greatest extent.
Tuning fork level switch,Marine tuning fork level switch,Fork Tuning Level Switch
Taizhou Jiabo Instrument Technology Co., Ltd. , https://www.taizhoujiabo.com