DOE reports on San Francisco street lighting demo

The US Department of Energy (DOE) has published the report from a demonstration of LED street lighting in San Francisco, California. An LED street lighting demonstration in San Francisco is one of a number of DOE Gateway demonstrations that showcase high-performance LED products for General illumination.
This Gateway report, prepared by Pacific Gas & Electric and Energy Solutions, provides an overview of project results including lighting performance, cost effectiveness, and potential energy savings.
In this project, LED street lights from four manufacturers ?C ie Beta LED, Cyclone, Leotek, and Relume - were installed on four public avenues in the Sunset District of San Francisco, each with a total of five street lights from the beginning to end Of the block.
On each avenue, 100-watt nominal high-pressure sodium (HPS) luminaires were replaced with new LED luminaires (each street featuring a different LED product).
Key findings are: While lighting performance varied among the LED luminaires assessed in this study, energy savings potential was high in each case, with energy reductions ranging from 50% to 70% over the current HPS system. The products that generally performed better in terms The report says that, overall, this assessment shows that energy savings potential from current LED street lighting is significant, and that savings potential is likely to further increase in the future as the energy and lighting Performance of LED street lights continues to improve.
However, not all products currently available are ready for mass deployment; limitations continue to exist in the lighting performance of some. Additionally, economic viability (which is subject to location details), will remain a key factor that must be weighed in concert with lighting Performance.
Incentive program development may further encourage LED street light adoption. The study recommends that any such incentive programs include performance standards that consider warranty, efficacy, light distribution, and other important criteria.

Ethereum Mining Machine

Bitcoin mining equipment is mainly highly specialized ASIC mill , The maximum computing power of a single miner is 110T/s( Ant S19Pro mill ), The scale of computing power of the whole network is 120EH/s above . Ethereum's mining equipment is mainly graphics card mining machine , Professional ASIC Mining machines are very few , On the one hand, it is because of the of Ethereum mining algorithm [ resist ASIC sex " Improved R & D efficiency ASIC The threshold of the miner , So how much do you know about the mainstream Ethereum mining machine ?

Ethereum mining algorithm has higher requirements for memory , The purpose of this design limits ASIC The use of chips in Ethereum mining . From the results , Most Ethereum mining machines are graphics card machines , This reflects the application of Ethereum mining algorithm ASIC Success on . From the absolute value of computational power scale , The computing power of Ethereum is about 200TH/s, The computing power of bitcoin is about 120EH/s, The latter is close to the former 60 ten thousandfold .

ASIC Mining machines have high computing power , Large power consumption , Like the latest ant S19Pro mill , Rated power consumption is 3250W, Need to consume... Every day 78 Degree electricity , According to the current currency price and 0.23 The electricity price in wet season is RMB , The proportion of electricity charge is 30.68%. Other older bitcoins ASIC mill , Like ants T17 series , The proportion of electricity charges generally exceeds 50%. by comparison , The power consumption of the graphics card miner is low , The proportion of electricity is also low . such as 5600XT8 Graphics card miner of card .

Ant S19-95T It adopts aluminum alloy profile electromechanical integrated design , Parallel four fan structure . According to the measured data , In line with and better than the official data .S19 The series is provided by TSMC 7nm chip , A new generation of customized chips with perfect whole machine architecture and high conversion rate APW12 Power Supply , Reduce power loss during conversion , Use more energy-saving , Greatly shorten the return cycle of the miner . In addition, the newly upgraded mining machine operation interface is also more humanized , Real time computing power . The average computing power and the operation of each chip are clear at a glance .

Shenma mining machine M30S-86T/88T/90T, Bit micro 2020 Launched in 2013 M30S Series of new mining machines , Announced that it would M30S The series is expanded to three 3X product . stay 3X In the new standard , Bit micro promises a one-year warranty for its series of products . This series of mining machines are provided by Samsung 8nm chip , Among them, god horse M30S series , The power consumption is 38J/T, Provide higher computing power , Lower power consumption and high stability.

Ethereum Mining Machine:Jasminer X4,Bitmain Antminer E9 (2.4Gh),iPollo V1,Jasminer X4-1U,iPollo V1 Classic,
Jasminer X4-C 1U,iPollo V1 Mini SE Plus

Ethereum Mining Machine,ETHW Miner,innosilicon a10 pro,E9 Antminer,Innosilicon A11

Shenzhen YLHM Technology Co., Ltd. , https://www.ylhm-tech.com