DS2740 High Precision Coulomb Counter Pin Configuration Instructions

Factory direct 5050 yellow light LED 5050 yellow light 5050 yellow high quality high brightness
Probe high frequency needle 10445 with line high frequency needle with 1 high frequency core can pass 3A

Overview:

The DS2740 is ideal for providing high-precision current-throughput data for cost-sensitive applications for battery capacity monitoring. The current is measured in both directions with a dynamic range of up to 15 bits (DS2740U) or 13 bits (DS2740BU), and the net flow is accumulated in a separate 16-bit register. Through the 1-Wire® interface, the DS2740 allows the host system to have read/write access to its status and current measurement registers. Each device has a unique factory-programmed 64-bit network address that allows the primary system to be individually addressed and supports multiple battery bays to work together. The interface can operate in standard or overdrive timing mode.

Although the DS2740 is primarily designed for use in the main system, it can also be used in battery packs. Using the DS2740 and FuelPackTM algorithms, coupled with temperature and voltage measurements supported by the host, constitutes a complete and accurate solution for estimating remaining capacity.

Key features:

  • 15-bit bidirectional current measurement (DS2740U)
    • 1.56μV LSB, ±51.2mV dynamic range
    • 78μA LSB, ±2.56A dynamic range (20mΩ external sense resistor R SNS )
    • 156μA LSB, ±5.12A dynamic range (10mΩ external sense resistor R SNS )
  • 13-bit bidirectional current measurement (DS2740BU)
    • 6.25μV LSB, ±51.2mV dynamic range
    • 312μA LSB, ±2.56A dynamic range (20mΩ external sense resistor R SNS )
    • 625μA LSB, ±5.12A dynamic range (10mΩ external sense resistor R SNS )
  • Analog input filter (IS1, IS2) extends the dynamic range of the pulsating load
  • Current accumulation register resolution
    • 6.25μVhr (DS2740U and DS2740BU)
    • 0.3125mAhr (external 20mΩ R SNS )
    • 0.6250mAhr (external 10mΩ R SNS )
  • Dallas 1-Wire interface
    • Unique 64-bit device address
    • Standard and overdrive timing (OVD)
  • Low power consumption:
    • Working current: 65μA (maximum)
    • Sleep current: 1μA (maximum)

Application / Use:

  • Cellular phone
  • Digital camera
  • Portable entertainment device
  • Smart battery pack/charger

Pin configuration:

1800 Puffs

Disposable electronic cigarette

Our products include disposable e-cigarettes, rechargeable e-cigarettes, and various of flavors of cigarette cartridges.We have our own professional team and competitive quotations for any OEM or ODM works.

We supply OEM disposable vape pen,OEM disposable electronic cigarette,ODM disposable vape pen,ODM disposable electronic cigarette,OEM/ODM vape pen e-cigarette,OEM/ODM atomizer device.

12 Flavors : Guava .Mango Ice .Passion Fruit .Mixed Fruit .Blueberry .Litchi Ice .Mango Ice .Lemon .Grapes.Watermelon .Banana Ice .Coconut



E Cigarette Oem Process



Disposable E-Cigarette,Electronic Cigarette Pod Pro,Atomizer Device Vapepod Pro,Atomizer Device Zgar Pod Pro

Shenzhen WeiKa Technology Co.,Ltd. , https://www.zgarvapor.com