Apple wireless charging receiver circuit solution

The iPhone is undoubtedly one of the best smartphones on the planet. However, its fast power consumption and short battery life have always caused the baby to break their hearts.

The battery capacity of other mobile phones is 3000/4000mAh, and even charging for five minutes for two hours; while the iPhone in the hands of the baby can only be accompanied by the charging treasure, charging for three hours of battery life.

However, Apple is not without a solution. But directly increasing battery capacity or using fast-charge chips are not Apple's high-end style. To play, just play something that others don't have! According to reports, Apple's latest patent, [wireless charging and communication system for dual-band antennas] has been approved by the US Patent Office. Therefore, in terms of battery life, the iPhone must be solved with a sci-fi and cool way~

Wireless charging has caused tremendous repercussions in the society since the concept period. With the advent of the new generation of iphone, wireless charging technology has once again been pushed up. Recently, Apple acquired the Auckland Wireless Charging Company, wireless or into the future direction. Taking advantage of this heat, Circuit City Xiaobian has also compiled some wireless charging design plans for everyone to learn more about this network red technology after a meal!

The wireless charging transmitter uses the TI chip bq500212A, which is mainly used for the wireless power alliance type A5 or A11 transmitter of the 5V system. The bq500212A wireless power charging transmitter micro USB interface input unit has a voltage of 5V and supports up to 2.5W of receiver output power.

The portable wearable device power wireless charging transmitter can be said to help design engineers to fully utilize their imagination. At the same time, it develops innovative and efficient wireless charging functions for smartphones, tablets and other portable electronic products. It can also design wireless charging power supplies to fully meet the power requirements from charging boards to automobiles and furniture. The wireless charging transmitter uses the TI chip bq500212A, which is mainly used for the wireless power alliance type A5 or A11 transmitter of the 5V system. The bq500212A wireless power charging transmitter micro USB interface input unit has a voltage of 5V and supports up to 2.5W of receiver output power.

Portable wearable device power supply hot, wireless charging transmitter design block diagram:

Portable wearable device power supply hot, wireless charging transmitter physical screenshot:

10" Woofer

10 Inch Woofer,10Inch Full Range Speaker,Neodymium Woofer Driver,10Inch Mid Bass Speaker

Guangzhou BMY Electronic Limited company , https://www.bmy-speakers.com