Dajiang drone breaks high limit tutorial

Founded in 2006, DJI-InnovaTIons (DJI) is the world's leading R&D and manufacturer of UAV control systems and drone solutions for customers in more than 100 countries. . Through continuous innovation, DJI is committed to providing the most powerful and best-performing revolutionary intelligent flight control products and solutions for the UAV industry, industry users and professional aerial photography applications.

Shenzhen Dajiang Baiwang Technology Co., Ltd. is a wholly-owned subsidiary of DJI Innovation, specializing in high-tech intelligent manufacturing plants for unmanned aerial vehicles. In 2016, Dajiang Baiwang passed the ISO9001:2015 quality management system certification of SGS, and in 2017 passed the ISO14001:2015 environmental management system certification of SGS.

DJI Innovation is committed to promoting the creativity of flight technology, and insists on fulfilling its social responsibilities with the status of the industry, promoting safe flight awareness for the public and maintaining public airspace order. Compliance-compliant flight operations not only allow you to be creative in an efficient and safe manner, but are also critical to the development of the drone community. Please strictly comply with local laws and regulations during flight, choose a safe flight environment, and work together to build a safe drone community.

In the latest DJI flight safety introduction, you will get the latest information about DJI's geofence system, including flight restriction strategy, new lifting system, and other safety tips to provide you with more specific, clear, accurate and reasonable. Flight safety information.

In order to ensure the safety of public airspace, we have set up an airport no-fly zone and a height limit zone for drones. The no-fly zone refers to the no-fly zone formed by expanding the coordinates of the airport protection zone defined by the Civil Aviation Administration to 100 meters. The restricted flight area extends 20 kilometers to the end of the two ends of the runway, and each side of the runway extends 10 kilometers to form a rectangle of about 20 kilometers wide and 40 kilometers long. The flight height is limited to 120 meters.

When the drone approaches the flight limit area, the app will pop up a warning indicating the risk of flight. We recommend that you return to the flight and re-select the flight location after receiving the warning.

When approaching the boundary of the restricted zone from outside, if the altitude is higher than the limit height, the drone will automatically decelerate and hover; if it is below the height limit, the altitude will be limited after flying into the flight zone; if there is no GPS signal Entering the flight-limited zone, the drone will automatically drop to the height limit after obtaining the GPS signal.

The drone cannot take off in the no-fly zone; when approaching the boundary of the no-fly zone from the outside, the drone will automatically decelerate and hover; if it enters the no-fly zone without GPS signal, the drone will get the GPS signal. Will land automatically.

1. Run SublimeText3_64 software, select file

2. Click to open the file, click on the computer, search for AppFiles in the search bar on the right, and pop out the folder AppFlies in the red box.

3. Double-click AppFlies to enter the following interface, then double-click main

4. Pull down to find the 113th, mainWindow.webContents.openDevTools () in front of the two / / delete, then click on the upper left corner of the file, which saves

5. Close SublimeText3_64

WMS Light Guide Rack

Twinkle System Technology Co Ltd , https://www.pickingbylight.com