Fire equipment RFID management project application

1. Application background

Every year, countless fire accidents occur around the world, causing many casualties and property losses. After China's reform and opening up, the public security fire department also made reference to the fire protection specifications of the advanced countries, and comprehensively formulated the fire protection design, installation and acceptance specifications in line with China's national conditions. However, with stringent fire codes, fires that cause casualties and property damage still occur from time to time. The adjustment results found that some of the fire facilities were not properly alarmed or fired because of the lack of proper management and proper maintenance after the fire broke out, so that the fire continued to spread. Therefore, for a building, no matter how its fire protection design meets the specification requirements, its fire protection facilities are complete, but it lacks perfect management and regular or regular maintenance. When a fire occurs, it may malfunction. Not the role of fire fighting. It can be seen that the daily management and maintenance of fire protection facilities is of great significance.

Enterprises and units are aware of this problem, purchase fire-fighting equipment, register fire-fighting equipment, establish personnel inspection and end-of-life replacement systems, and ensure the availability of fire-fighting equipment to a certain extent, but it is undeniable because of the lack of effective information management and supervision. Means, in the daily inspection management, there are actually a lot of loopholes. There are many places where management is imperfect, the inventory is heavy, the inspection is not in place, the equipment is lost, and so on, and a lot of security risks are buried.

2. System Introduction

It is imperative to use advanced information technology, strengthen information management capabilities, strengthen the supervision of inspection procedures, improve the management level of the entire fire-fighting equipment, and eliminate potential safety hazards.

The core of the management of fire-fighting equipment lies in the establishment of basic data and the collection and acquisition of data information at various key nodes. RFID radio frequency identification technology has been paid more and more attention and attention since it was applied in World War II. More and more industries are paying attention to the function and practicability of RFID. R&D personnel have successively developed performance stability performance from generation to generation. Information acquisition equipment and information storage equipment that meet a variety of needs, which makes the use of RFID quickly extended to various fields, RFID plays a very important role in fixed asset management.

RFID technology uses wireless electromagnetic waves to realize data transmission and interaction. It is a non-contact automatic identification technology. The identification process does not require manual intervention and can work in a variety of harsh environments. RFID is unique in that it can recognize objects moving at high speed and simultaneously identify multiple tags. Therefore, the application of RFID technology to the management of fire-fighting equipment can make the management of the equipment easier and simpler, avoiding data errors and time consumption caused by manual operation and recording, and solving problems in the existing management mode for fire protection. The safe use of equipment provides protection.

3. System design

The fire equipment management system based on RFID technology integrates the corresponding asset information in the background by installing RFID electronic tags on the fire equipment, and accurately obtains the detailed information of the assets through the collection of RFID electronic tag information in key nodes and processes. .

3.1 System Framework

The basic framework of the system is as follows:

blob.png

3.2 system flow

3.2.1 A passive rfid label is attached to all fire-fighting equipment in the jurisdiction. The label has memory to record the purchase time, expiration time, installation time, person in charge, and the number of inspections of the fire-fighting equipment.

3.2.2 The system establishes the electronic file of the fire-fighting equipment, which is stored in the central server of the management department and provides the expiration alarm function. The system will give an alarm prompt on the unit management page, and will also send a text message to the mobile phone of the relevant person or person in charge of the unit to remind them to replace it.

3.2.3 The fire management department shall arrange the inspection plan of each unit and the sampling plan of the management department. These plans may be annual plans, monthly plans, weekly plans, temporary plans, etc. The system will automatically generate SMS content according to the plan and send it to the system in time. On the mobile phone of the relevant executor of each unit, the person (unit) is reminded to carry out the inspection work of the fire-fighting equipment, and the plan can also be downloaded to the mobile data collection terminal of the specific executor.

3.2.4 Each unit inspection personnel, the management unit sampling personnel are equipped with a mobile data collection terminal, the terminal can communicate with the rfid tag on each fire equipment, or can communicate with the upper computer (management computer). Each inspection personnel receives the inspection plan of the management department, and scans (reads) each fire equipment in turn. At this time, a inspection record is formed in the handheld. If the equipment is found to be damaged or the function is abnormal, The inspector will make the appropriate selection on the handheld and save it in the inspection record.

3.2.5 Each sampling personnel receives the sampling inspection plan of the management department, and then arrives at the designated unit, and then reads the fire fighting equipment of the unit in turn. At this time, a patrol inspection record is formed in the handheld machine. If the equipment is found to be damaged, Or the function is not normal, the sampler will make the corresponding selection on the handheld and save it in the sampling record.

3.2.6 The management department obtains the relevant record data of each unit, conducts statistics, analyzes, forms various reports, and according to different inspection records, supervises the responsible units to perform relevant maintenance or replacement work, and completes the supervision of fire equipment in various regions. .

3.3 System Features

Dynamically display the current status of each fire-fighting equipment, and know the current status of each fire-fighting equipment anytime, anywhere.

The position (coordinate) of the fire-fighting equipment can be determined when the basic data is set. Then the system will display the location and current status of the equipment according to the real-time inspection record. If it is intact or faulty or expires, the system will give it in different colors. Mark, let the manager know at a glance.

Real-time analysis of the operation information of the inspection personnel, effective supervision of the inspection personnel.

The system has set up multiple plans, such as patrol check and sampling plan, and then according to the patrol record and sampling record to feedback the implementation of each patrol (sampling), so as to effectively supervise the patrol personnel to prevent laziness and do The disadvantages occur, and the inspection is also in place to ensure the safe use of fire-fighting equipment.

It can solve the problem in time and promote the completion of the business.

When the inspector sends the fault information back to the central server, the host computer management system will immediately capture it and notify the relevant personnel to process it immediately or according to the plan, and then monitor the fault processing feedback information in real time until the feedback information is obtained, and the service is terminated. .

Get a lot of valuable reports

The management system will comprehensively analyze various records in the system according to requirements, and provide a large number of reports to facilitate scientific decision-making by management.

Garmin Battery

Garmin Battery,Garmin GPS Battery,Garmin Nuvi Battery,Garmin Rechargeable Battery

Shenzhen Sunwind Energy Tech Co.,Ltd , https://www.sunwindbatterylm.com