Speed ​​school floor lamp installation, you are also the lamp master!
Speed ​​school floor lamp installation, you are also the lamp master!
Release date: 2018-05-18 Source: Light Master share: 
Table lamps and floor lamps are vertical lamps, but floor lamps are different from desk lamps. If the desk lamps are for the convenience of local lighting, most of the floor lamps are used to set off the space. The installation of the floor lamp is much simpler than that of the chandelier, and the user can complete the installation smoothly.
How to install the floor lamp
1. Preparation before installation - floor lamp installation (1) First read the installation book and floor lamp installation diagram, check the lamp model, count its number, prepare the installation kit, there are flat cross screwdriver, wrench, pliers and so on. (2) After unpacking the parts, do not arbitrarily change the position of the parts. According to the prompts, set the last used parts aside to save time in finding parts during installation.
2. Start installation - floor lamp installation. (1) Floor lamp generally has a cast iron chassis, which is smaller than the surface base. The black plastic cap is used to fix the lampshade. The order from bottom to top is the chassis fastening nut, cast iron chassis, base. , light poles, lamp holders, lampshades, plastic fasteners, light bulbs, etc., do not make mistakes yourself, there is a corresponding record. (2) The power cord coming out of the floor lamp pole should pass through the chassis fastening nut, cast iron chassis, base; then connect with the power cord, and finally wrap it with electrical tape, the chassis should be reserved for the recess, the power cord can be extended come out. (3) The power cord of the floor lamp must be handled well, pay attention to the safety of use, because the indoors move around and avoid the wires falling over.
3. Check-floor lamp installation (1) When the floor lamp is installed, compare it with the installation diagram first, check if the installation is correct, and then check the fixing problem of the screw. (2) You can first connect the power supply, check the switch status, and focus on whether it can work normally. If it can, let it illuminate for about 10 minutes to check if there is any abnormality. In summary, the installation process of the floor lamp is relatively simple, which eliminates the process of punching and accurate measurement, and the construction process is also reduced. From the user's point of view, it is not difficult to install the floor lamp, but pay attention to the planning of the line. If you have an electrician foundation, it would be great, don't worry about the potential danger in the installation of the floor lamp.
More lighting is at https:// .
Label: lamps wholesale lighting procurement lamps to join billion lamp network
The 8-inch tablet will have a big impact on the 7-inch and 10-inch tablet market. Because the portability of an 8-inch tablet is stronger than that of a 10-inch tablet, and the usable area is larger than that of a 7-inch tablet. The most important thing is that the price is more moderate, which is much cheaper than a 10-inch tablet. It can be said that the 8-inch tablet computer has a good balance between portability and screen display area, and is more likely to be favored by the majority of users.
8 Inches Tablet Pc,Tablet Computer,8 Inch Android Tablets,8 Inch Tablet
Jingjiang Gisen Technology Co.,Ltd , https://www.jsgisentec.com